Remove/install rear bumper - AR88.20-P-2200N
MODEL 215 with CODE (550) Trailer hitch except CODE (772) AMG styling package - front spoiler, side skirts and rear apron trailer hitch with removable ball neck
MODEL 215 with CODE (550) Trailer hitch except CODE (772) AMG styling package - front spoiler, side skirts and rear apron mechanically pivoting trailer hitch
| Remove | |||
| 1 | Remove trunk lining | Model 215.3. |
AR68.30-P-4600M |
| 2.1 | Disconnect emergency call system (TELEAID) replacement antenna connector (X23/17) | ||
| 3.1 | Disconnect PTS connector, rear bumper (X35/28) | ||
| 4 | Unscrew bolts (5). | ||
| 5 | Push fender liner (7) to the side and unscrew bolts (6) | ||
| 6 | Unscrew nut (14) | ||
| 7 | Remove covers (15) and loosen nuts (9) 2 to 3 turns | ||
| 8 | Remove bumper (1) | ||
| 9 | Unscrew bolts (3) and remove bumper bracket (2) from bumper (1) | ||
| Install | |||
| 10 | Fit bumper bracket (2) in bumper (1) and screw in bolts (3) | *BA31.11-P-1004-01A | |
| 11 | Install bumper (1), slide mount (1a) on left and right into guides (8) | ||
| 12 | Adjust bumper (1) in longitudinal direction | ||
| 13 | Adjust height of bumper (1) | ||
| 14 | Tighten nuts (9) and install covers (15) | ||
| *BA31.11-P-1005-01A | |||
| 15 | Screw on nut (14) | ||
| 16 | Screw in bolts (5) | ||
| 17 | Screw in bolts (6) and install fender liner (7) | ||
| 18.1 | Connect rear bumper PTS connector (X35/28) | ||
| 19.1 | Connect emergency call system (TELEAID) replacement antenna connector (X23/17) | ||
| 20 | Install trunk linings | Model 215.3. | AR68.30-P-4600M |
| Number | Designation | Model 215 | |
|---|---|---|---|
| BA31.11-P-1004-01A | Bolt, bumper to bumper reinforcement | Nm | 8 |
| BA31.11-P-1005-01A | Nut, bumper reinforcement to trailer hitch | Nm | 8 |