Retrofitting telephone (fixed installation) - AN82.70-P-0003N

MODEL 215 up to 31.8.03 with CODE (316) MB GSM cellular telephone (D2B) with CODE (347) TELE AID emergency call system (D2B) conversion of Motorola 2700 to Motorola 3788 

Fig 1: Identifying Telephone (Fixed Installation) Components Location - Model 215 Up To 31.8.03

	Remove
	Notes on telephone conversion for Tele Aid emergency call system		AH82.70-P-0001-10A
1.1	Connect no load current retention unit	Applies only to vehicles without TELE AID emergency call system code (347).
		Quiescent current retention unit CMP 12.2	*WH58.30-Z-1012-09A
	Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Pour battery acid only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
2	Disconnect battery ground cable
			AR54.10-P-0003I
	Notes on battery	All models	AH54.10-P-0001-01A
3	Remove CTEL handset	Handset is no longer required.
		Model 215 up to 30.6.00 with code (316) MB D-network telephone (D2B) in center armrest	AR82.70-P-8912M
4	Remove rear seat cushion
			AR91.12-P-1020N
5	Remove seat adjustment device on rear seat
6	Remove transmitter/receiver.	Transmitter/receiver is no longer required. Installation:  install new transmitter/receiver.
		Model 215 up to 30.6.00 with CODE (316) MB D-network telephone (D2B)	AR82.70-P-8911I
	Install
7	Install telephone base holder.	Install new tray with handset.	AN82.70-P-0003-05N
8	Install in the reverse sequence	Steps 6 to 1.
9	Carry out start-up and function test