Retrofit hands-free microphone - AN82.70-P-8969-04MA
Models 215, 220
Layout shown on vehicle equipped with Tele Aid
The wiring harness for the hands-free system microphone is pre-installed in every vehicle and thus does not have to be inserted new.
- Unclip overhead control panel.
- Unclip cover (without microphone) at mirror base.
- Connect new cover (1) with microphone for the hands-free system (B25) to the microphone for the hands-free system connector (B25x1).
The vehicle's interior equipment specification must be taken into account when selecting the cover (color).