Ignition of removed emergency tensioning retractors - AR91.40-P-0611-02A
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. Interrupt power supply when working on such units Except model 202 up to 30.6.93 |
AS91.00-Z-0001-01A | |
| Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side toward top, do not expose to temperatures above 100 °C. When working on these units, disconnect current supply and disconnect airbag (AB) with emergency tensioning retractor test connector/connector (X11/13) Model 202 up to 30.6.93 | AS91.00-Z-0001-01B | |
| Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units | Model 163, 164, 168, 170, 199, 202, 203, 208, 209, 210, 215, 220, 230, 240, 251, 414, 461, 463, not valid for |
AH91.60-P-0611-02P | |
| Notes on disposing of airbag and emergency tensioning retractor units | All models | OS91.00-P-0001-01A |
Using the deployment device
- Insert 2-pin plug connection (8) on the unit to be scrapped.
- Dial the rotary switch (4) to position "1".
- Press the battery control pressure switch (2) and deployment pressure switch (3) simultaneously.
Keep a distance of 10 m for safety.