General repair methods for wiring harness - AR00.19-P-0100A
MODEL 124, 126, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 197, 199, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 246, 251, 414, 450, 451, 452, 454, 461, 463
| Figure/item, etc. | Work instructions | ||
| Risk of injury to skin and eyes caused by handling hot or glowing objects. | Wear safety gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by burns to skin and eyes. Risk of poisoning caused by inhaling fumes when working with heat-shrinkable tubing. | Work in well ventilated rooms only. Wear safety glasses with side protection and protective gloves. | AS00.19-Z-0001-01A | |
| Risk of injury caused by burns to skin and eyes, risk of poisoning caused by inhaling fumes during soldering. | Wear protective gloves, protective clothing and safety glasses. Ensure that the work area is adequately ventilated. Secure power supply cables. Avoid sources of fire in working area. | AS00.19-Z-0002-01A | |
| Notes on replacement of safety-relevant and special components | AH00.19-P-1000-08A | ||
| Assessment of damage in wiring harnesses | AH00.19-P-1000-05A | ||
| Notes on using paint chafing nut for ground connections | Model 166, 172, 246 | AH00.19-P-1000-20A | |
| Notes on crimping | AH00.19-P-1000-09A | ||
| Notes on soldering | AH00.19-P-1000-10A | ||
| Notes regarding plug connections | AH00.19-P-1000-06A | ||
| Advantages of repairing wiring harnesses | AH00.19-P-1000-03A | ||
| Repair methods for wiring harnesses | Model 124, 126, 129, 140, 163, 164, 166, 168, 169, 170, 171, 172, 197, 199, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 240, 245, 246, 251, 414, 461, 463 | AH00.19-P-1000-04A | |
| Model 450, 451, 452, 454 | AH00.19-P-1000-04SM | ||
| Notes on soft soldering | AH00.19-P-1000-07A | ||
| Notes on cable protection | AH00.19-P-1000-11A | ||
| Assessment of high-voltage components | Model 164.195, 169.090, 221.095/ 195 | AH54.00-P-6500-01SXH | |
| Removing contacts from plugs and connectors | AR00.19-P-0120A | ||
| Repairing wiring harness using solder connectors | AR00.19-P-0100-09A | ||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
Hot air blower gotis://E_15/54_12.0 |
Figure | ||
| Repair wiring harness by means of axial solder connectors | AR54.18-P-0100-06A | ||
| Hot air blower gotis://E_15/54_12.0 | |||
| Repair wiring harness by crimping | AR00.19-P-0100-03A | ||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Repair flat conductor wiring harness by crimping | Model 164, 204, 211, 216, 219, 221, 251 | AR00.19-P-0100-10A | |
| Fig 5 | |||
| Repair wiring harness by crimping (with watertight connections) | AR00.19-P-0100-04A | ||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Repairing cable harness by soldering | AR00.19-P-0100-05A | ||
| Figure | |||
| Figure | |||
| Figure | |||
| Figure | |||
| Repair cable harness using rapid connection technology | AR00.19-P-0100-06A | ||
| Protect repair area after cable repairs | Hot air blower gotis://E_15/54_12.0 | AR00.19-P-0100-08A | |
| Checking wiring harness | Except model 450, 451, 452, 454 | AR54.18-P-0600-01A | |
| Figure | |||
| Figure | |||
| Plugs and couplings as-built configuration | Model 124, 126, 129, 140, 163, 164, 168, 169, 170, 171, 199, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461, 463 | GF00.19-P-8000A | |
| Female contacts and contact pins, installation survey, as-built configuration | Model 124, 126, 129, 140, 163, 164, 168, 169, 170, 171, 199, 202, 203, 204, 208, 209, 210, 211, 215, 216, 219, 220, 221, 230, 240, 245, 251, 414, 461, 463 | GF00.19-P-7000A |