LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> G55 >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electrical, Equipment & Instructions -- Testing & Repair -- G-Class (463)) >> Testing & Repair >> Remove/install luggage compartment relay holder - AR54.15-P-1265GR

Remove/install luggage compartment relay holder - AR54.15-P-1265GR

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Mercedes-Benz G550, 2014 Mercedes-Benz G550, 2013 Mercedes-Benz G550, 2012 Mercedes-Benz G550, and 2011 Mercedes-Benz G550. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 463.202/222/237/243/244/245/246/247/249/250/254/270/271/303/306/309/322/323/332/333/336/340/341/346 

MODEL 463.236/248 except CODE (979) Special protection version 

Fig 1: Identifying Luggage Compartment Relay Holder Remove/Install Components
G07742162Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of explosion  caused by oxyhydrogen gas. Risk of poisoning and caustic burns  caused by swallowing battery acid. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries No fire, sparks, open flames or smoking. Wear acid-resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers. AS54.10-Z-0001-01A
1 Disconnect battery ground line   AR54.10-P-0003G 
NOTES Notes on battery All models AH54.10-P-0001-01A
2 Remove TV tuner Only for vehicles with code (EM8) TV tuner or code (EM9) TV tuner AR82.85-P-7366GR
3 Remove CD changer Only for vehicles with code (EP5) CD changer AR82.64-P-7508GR
4 Disconnect CL [ZV] relay (K44) and relay of rear-end door wiper motor (K68) from relay coupling (1)    
5 Remove relay holder (2) IMPORTANT To do this, unscrew bolts (3) and nuts (4).  
6 Install in the reverse order    
7 Read out fault memory and erase IMPORTANT Stored faults which may be caused by assembly work, test work, removed lines or a simulation, must be processed and erased in fault memories after completing the work.  
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory   AD00.00-P-2000-04A
INSPECT Checking     
8 Perform function check of central locking and rear wiper