Remove/install daylight sensor - AR82.10-P-2400GM

MODEL 463.202 /222 /236 /237 /243 /244 /245 /246 /247 /248 /249 /250 /254 /270 /271 /303 /306 /309 /322 /323 /332 /333 /336 /340 /341 /346 

Fig 1: Identifying Daylight Sensor Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove inside rearview mirror		AR68.40-P-0001GM
2	Remove cover (1)
3	Disconnect electrical connector (2) from automatic light switch daylight sensor (B32/1)
4	Unclip and remove automatic light switch daylight sensor (B32/1)	Lens of automatic light switch daylight sensor (B32/1) is stuck to the windshield and can therefore not be removed.
5	Install in the reverse order
6	Perform function check