Electric wiring diagram for rear-end door/liftgate - PE72.20-P-2050-99GA
MODEL 463.237 /271 up to 31.5.12, Model 249 as of 156043 up to 31.5.12
| Code: | Designation: | Location: |
|---|---|---|
| A0 | Color code key | L64 |
| E21 | Center high-mounted stop lamp | L34 |
| E21 | Center high-mounted stop lamp | L36 |
| E21 | Center high-mounted stop lamp | L39 |
| F32 | Front prefuse | L2 |
| F32f1 | Prefuse 1 | K2 |
| K44 | CL (ZV) relay | L54 |
| K68 | Rear-end door wiper motor relay | L29 |
| M145/7 | Rear-end door CL (ZV) motor | L50 |
| M6/4 | Rear-end door wiper motor | L31 |
| N10/1 | Front signal acquisition and actuation module (SAM) | L121 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A2 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A8 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A15 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A23 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A29 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A35 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A42 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A49 |
| N10/2 | Rear signal acquisition and actuation module (SAM) | A56 |
| N10/2f1 | Fuse 1 | B8 |
| N10/2f10 | Fuse 10 | C26 |
| N10/2f14 | Fuse 14 | C28 |
| N10/2f19 | Fuse 19 | B19 |
| N10/2f20 | Fuse 20 | C55 |
| N10/2f7 | Fuse 7 | B6 |
| N10/2kB | Relay 2, circuit 15R | A9 |
| N10/2kD | Backup relay 1 | A4 |
| N10/2kE | heated rear window relay | A24 |
| N10/2kF | Relay 1, circuit 15R | A22 |
| R1 | Heated rear window | L26 |
| S17/18 | Tailgate contract switch | L42 |
| S17/18 | Tailgate contract switch | L44 |
| U142 | Not valid for convertible | E25 |
| U142 | Not valid for convertible | E43 |
| U142 | Not valid for convertible | E47 |
| U142 | Not valid for convertible | F51 |
| U292 | Valid for all except G55 AMG and special protection vehicles | E14 |
| U292 | Valid for all except G55 AMG and special protection vehicles | E18 |
| U294 | Valid for G55 AMG | F14 |
| U294 | Valid for G55 AMG | E18 |
| U441 | Valid for special protection | E14 |
| U441 | Valid for special protection | E36 |
| U697 | Valid for all | F18 |
| U7 | Valid for convertibles | G35 |
| U7 | Valid for convertibles | E41 |
| U7 | Valid for convertibles | F49 |
| U906 | Valid for USA, Latin America and Canada | E47 |
| W10/8 | Ground (right battery recess) | L9 |
| W7/3 | Ground (right taillamp) | L9 |
| W8 | Ground (luggage compartment toolbox) | F25 |
| W8 | Ground (luggage compartment toolbox) | H29 |
| W8 | Ground (luggage compartment toolbox) | E33 |
| W8 | Ground (luggage compartment toolbox) | L38 |
| W8 | Ground (luggage compartment toolbox) | L40 |
| W8 | Ground (luggage compartment toolbox) | H42 |
| W8 | Ground (luggage compartment toolbox) | L46 |
| W8 | Ground (luggage compartment toolbox) | H56 |
| X18/41 | Luggage compartment switch connector | L47 |
| X20/1 | Center high-mounted stop lamp connector | H35 |
| X30/7 | Voltage distributor (CAN) connector | L15 |
| X30/7 | Voltage distributor (CAN) connector | L19 |
| X8/4 | Rear-end door connector (8-pin) | H25 |
| X8/4 | Rear-end door connector (8-pin) | G30 |
| X8/4 | Rear-end door connector (8-pin) | F34 |
| X8/4 | Rear-end door connector (8-pin) | H37 |
| X8/4 | Rear-end door connector (8-pin) | F42 |
| X8/4 | Rear-end door connector (8-pin) | F43 |
| X8/4 | Rear-end door connector (8-pin) | H45 |
| X8/4 | Rear-end door connector (8-pin) | H47 |
| X8/4 | Rear-end door connector (8-pin) | E49 |
| X8/6 | Rear-end door contact intermediate connector | H43 |
| Z20/35 | CAN bus screening end | J16 |
| Z50/4 | Connector sleeve 4 | F36 |
| Z6/1 | Ground connector sleeve | H40 |
| Z6/20 | Rear-end door ground connector sleeve | H33 |
| Z6/20 | Rear-end door ground connector sleeve | F45 |
| Z73/6 | CAN bus shielding solder terminal | L17 |