Remove/install front floor covering (right) - AR68.20-P-2070T
MODEL 211.0/ 2/ 6
Shown on model 211.0
| Remove/Install | |||
|---|---|---|---|
| 1 | Remove cover below right instrument panel | AR68.10-P-1520T | |
| 2 | Remove right A-pillar paneling | AR68.30-P-4050TA | |
| 3 | Remove edge guard (3) in area of scuff plate (2) | ||
| 4 | Remove scuff plate (2) | ||
| 5 | Pull out right front floor covering (1) from below instrument panel (arrow) | ||
| 6 | Remove right front floor covering (1) | ||
| 7 | Install in the reverse order |