Remove/install taillamp on tailgate - AR82.10-P-4925T

MODEL 211.2/ 6 

Fig 1: Identifying Taillamp On Tailgate Components (Shown On Model 211.2)

Shown on model 211.2 

	Remove/install
1.1	Remove all paneling from rear-end door	Model 211.2	AR72.20-P-3520T
1.2	Remove existing paneling from rear-end door until the left rear-end door taillamp (E3/1) or right rear-end door taillamp (E4/1) is accessible	Model 211.6 Whether paneling exists or what paneling versions are used depends on the vehicle equipment.
2	Disconnect electrical connector (1)
3	Unscrew nut (2) and remove clamping piece (3)
4	Remove left rear-end door taillamp (E3/1) or right rear-end door taillamp (E4/1) from rear end door	Installation:  Check correct seating of retaining brackets (5) on rear-end door.
5	Install in the reverse order