Remove/install antenna amplifier module - AR82.62-P-8300T

MODEL 211.0 

Left antenna amplifier module 

Fig 1: Identifying Antenna Amplifier Module Components

MODIFICATION NOTES

15.1.04

Disconnect/connect/remove ground lead from battery

	Remove/Install
	Notes on avoiding damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
1	Remove paneling from left C-pillar		AR68.30-P-4490T
2	Separate electrical connections (3, 4)
3	Unscrew nuts (1, 2)	Installation:  Pay attention to unobstructed movement of headliner wiring harness (6) behind the left antenna amplifier module (A2/64).
4	Remove left antenna amplifier module (A2/64) from C-pillar and remove tie strap (5)
5	Remove left antenna amplifier module (A2/64)
6	Install in the reverse order
7	Perform a function test