Special tools: Passenger cars: Part numbers 220 - WS00.01-Z-9220AZ
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 220 589 00 01 00 Open-end wrench | FG 46/Set B | WS46.00-P-0072B |
| 220 589 00 07 00 Pin wrench | FG 82/Set K | WS82.00-P-0018K |
| 220 589 00 09 00 Adapter | FG 32/Set C | WS32.00-P-0081C |
| 220 589 00 15 00 Drift set | FG 33/Set B | WS33.00-P-0156B |
| 220 589 00 21 00 Eccentric wrench | FG 62/Set K | WS62.00-P-0107K |
| 220 589 00 22 00 Software service CD | FG 82/Set B | WS82.00-P-0016B |
| 220 589 00 23 00 Inspection and welding gage | FG 62/Set K | WS62.00-P-0030K |
| 220 589 00 27 00 Pulling device | FG 62/Set K | WS62.00-P-0105K |
| 220 589 00 32 00 Adapter plates | Group 62/Set K | WS62.00-P-0138K |
| 220 589 00 33 00 Puller | FG 33/46/Set B | WS33.00-P-0117B |
| 220 589 00 43 00 Removal and installation tool | FG 35/Set B | WS35.00-P-0172B |
| 220 589 00 61 00 Removal, installation | FG 32/Set B | WS32.00-P-0072B |
| 220 589 00 63 00 Impact marking guide | FG 62/Set K | WS62.00-P-0103K |
| 220 589 00 99 00 Electrical connection kit | FG 00 FG 01/13/15/20/25/42/43/47/54/72/Set B | WS54.00-P-0050B |
| 220 589 00 99 01 Adapter cable | FG 42/43/54/Set B | WS54.00-P-0050-01B |
| 220 589 00 99 02 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-02B |
| 220 589 00 99 03 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-03B |
| 220 589 00 99 04 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-04B |
| 220 589 00 99 05 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-05B |
| 220 589 00 99 06 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-06B |
| 220 589 00 99 07 Adapter line | FG 25/42/43/54/Set B | WS54.00-P-0050-07B |
| 220 589 00 99 08 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-08B |
| 220 589 00 99 09 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-09B |
| 220 589 00 99 10 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-10B |
| 220 589 00 99 11 Adapter line | FG 00/09/42/43/54/Set B | WS54.00-P-0050-11B |
| 220 589 00 99 12 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-12B |
| 220 589 00 99 13 Adapter line | FG 42/43/54/Set B | WS54.00-P-0050-13B |
| 220 589 00 99 14 Adapter line | FG 54/Set B | WS54.00-P-0050-25B |
| 220 589 00 99 15 Set of adapter cables | FG 54/Set B | WS54.00-P-0050-28B |
| 220 589 00 99 20 Test cable | FG 20/25/42/43/54/Set B | WS54.00-P-0050-14B |
| 220 589 00 99 21 Clamp | FG 42/43/54/Set B | WS54.00-P-0050-15B |
| 220 589 00 99 22 Safety clamp | FG 25/42/43/54/Set B | WS54.00-P-0050-16B |
| 220 589 00 99 23 Clamp test probe | FG 42/43/54/Set B | WS54.00-P-0050-17B |
| 220 589 00 99 24 Connection plug | FG 42/43/54/Set B | WS54.00-P-0050-18B |
| 220 589 00 99 25 Empty case | FG54/Set B | WS54.00-P-0050-26B |
| 220 589 00 99 30 Adapter cable | FG 42/43/54/Set B | WS54.00-P-0050-19B |
| 220 589 00 99 31 Adapter cable | FG 42/43/54/Set B | WS54.00-P-0050-20B |
| 220 589 00 99 33 Safety cable | FG 42/43/54/Set B | WS54.00-P-0050-22B |
| 220 589 00 99 34 Adapter cable | Group 42/43/54/Set B | WS54.00-P-0050-23B |
| 220 589 00 99 35 Adapter cable | FG 00/09/20/42/43/54/Set B | WS54.00-P-0050-24B |
| 220 589 00 99 36 Adapter cable | FG54/Set B | WS54.00-P-0050-27B |
| 220 589 00 99 37 Adapter cable | FG54/15/Set B | WS54.00-P-0050-37B |
| 220 589 00 99 38 Adapter cable | FG54/Set B | WS54.00-P-0050-38B |
| 220 589 00 99 39 Adapter cable | FG54/Set B | WS54.00-P-0050-39B |
| 220 589 01 01 00 Open-end wrench | FG 46/Set B | WS46.00-P-0073B |
| 220 589 01 09 00 Socket wrench bit | FG 28/Set B | WS28.00-P-0093B |
| 220 589 01 09 00 Socket wrench bit | FG 35/Set B | WS35.00-P-0253B |
| 220 589 01 21 00 Key card programming set | FG 82/Set B | WS82.00-P-0014B |
| 220 589 01 21 01 Key card programming unit | FG 82/set B | WS82.00-P-0014-01B |
| 220 589 01 22 00 DC - Navigation test CD | FG 82/Set B | WS82.00-P-0031B |
| 220 589 01 23 00 Inspection and welding gage | FG 62/Set K | WS62.00-P-0031K |
| 220 589 01 27 00 Pulling device | FG 62/Set K | WS62.00-P-0104K |
| 220 589 01 31 00 Guard plate | FG 42/33/35/Set B | WS42.00-P-0042B |
| 220 589 01 43 00 Removal and installation tool | FG 35/Set B | WS35.00-P-0171B |
| 220 589 01 43 12 Threaded spindle | FG35 03/Set B | WS35.00-P-0171-01B |
| 220 589 01 63 00 Supports | FG 35/Set B | WS35.00-P-0176B |
| 220 589 01 99 01 Fl. crimping set 6.3/2.8 | FG00/Set B | WS00.19-P-0001-01B |
| 220 589 01 99 02 Crimp set for cable lugs | FG00/Set B | WS00.19-P-0001-02B |
| 220 589 01 99 03 MCP 2.8 crimping set | FG00/Set B | WS00.19-P-0001-03B |
| 220 589 01 99 04 MCP 2.8 crimping set | FG00/Set B | WS00.19-P-0001-04B |
| 220 589 01 99 05 JPT crimping set | FG 00/54/83/Set B | WS00.19-P-0001-05B |
| 220 589 01 99 06 RK 2.5 crimping set | FG00/Set B | WS00.19-P-0001-06B |
| 220 589 01 99 07 Crimp set SLK 2.8 | FG00/Set B | WS00.19-P-0001-07B |
| 220 589 01 99 08 SLK 2.8 crimping set/ELA | FG00/Set B | WS00.19-P-0001-08B |
| 220 589 01 99 09 SLK 2.8 ELA crimping set | FG00/Set B | WS00.19-P-0002-02B |
| 220 589 01 99 10 Crimp pliers | FG 00/14/54/83/Set B | WS00.19-P-0001-09B |
| 220 589 01 99 11 Fl. positioner 6.3/2.8 | FG00/Set B | WS00.19-P-0001-10B |
| 220 589 01 99 12 Positioner for cable lugs | FG00/Set B | WS00.19-P-0001-11B |
| 220 589 01 99 13 Locator MCP 2.8 | FG00/Set B | WS00.19-P-0001-12B |
| 220 589 01 99 14 Locator MCP 2.8 | FG00/Set B | WS00.19-P-0001-13B |
| 220 589 01 99 15 Positioner, JPT | FG00/54/Set B | WS00.19-P-0001-14B |
| 220 589 01 99 16 Positioner RK 2.5 | FG00/Set B | WS00.19-P-0001-15B |
| 220 589 01 99 17 SLK 2.8 positioner | FG00/Set B | WS00.19-P-0001-16B |
| 220 589 01 99 18 SLK 2.8 positioner | FG00/Set B | WS00.19-P-0001-17B |
| 220 589 01 99 19 SLK 2.8 ELA positioner | FG00/Set B | WS00.19-P-0002-03B |
| 220 589 01 99 20 Unlocking device with RK 1.5 ejector | FG00/54/Set B | WS00.19-P-0001-18B |
| 220 589 01 99 21 Replacement sleeve, RK 1.5 | FG00/54/Set B | WS00.19-P-0001-19B |
| 220 589 01 99 25 Unlocker with ejector MLK 1.2 plug | FG00/Set B | WS00.19-P-0002-04B |
| 220 589 01 99 30 Unlocking device with RK 2.5 ejector | FG00/14/54/Set B | WS00.19-P-0001-20B |
| 220 589 01 99 31 Spare sleeve, RK 2.5 | FG00/54/Set B | WS00.19-P-0001-21B |
| 220 589 01 99 40 Wire stripper | FG 00/54/83/Set B | WS00.19-P-0001-22B |
| 220 589 01 99 41 Reflector | FG 00/54/83/Set B | WS00.19-P-0001-23B |
| 220 589 01 99 42 Adapter | FG 00/54/83/Set B | WS00.19-P-0001-24B |
| 220 589 01 99 50 Blade holder with clamping pliers | FG00/14/54/83/Set B | WS00.19-P-0001-25B |
| 220 589 01 99 51 MPT blade | FG00/Set B | WS00.19-P-0001-26B |
| 220 589 01 99 52 RK 4.0 Blade solder contact | FG00/Set B | WS00.19-P-0001-27B |
| 220 589 01 99 53 RK 2.5 Blade solder contact | FG00/Set B | WS00.19-P-0001-28B |
| 220 589 01 99 54 MT 3 blade | FG00/83/Set B | WS00.19-P-0001-29B |
| 220 589 01 99 55 E 95 blade | FG00/Set B | WS00.19-P-0001-30B |
| 220 589 01 99 56 LSK 8 blade | FG00/Set B | WS00.19-P-0001-31B |
| 220 589 01 99 57 Fl. blade2.8 | FG00/Set B | WS00.19-P-0001-32B |
| 220 589 01 99 58 Fl. blade4.8/6.3 | FG00/Set B | WS00.19-P-0001-33B |
| 220 589 01 99 59 MCP 2.8/Fl. blade 2, 8 | FG00/Set B | WS00.19-P-0001-34B |
| 220 589 01 99 60 MQS blade | FG00/54/Set B | WS00.19-P-0001-35B |
| 220 589 01 99 61 JPT/SPT blade | FG00/Set B | WS00.19-P-0001-36B |
| 220 589 01 99 62 SLK 2.8 blade | FG00/Set B | WS00.19-P-0001-37B |
| 220 589 01 99 63 Blade SLK 2.8 - 97 | FG00/Set B | WS00.19-P-0001-38B |
| 220 589 01 99 71 Blade box, upper part | FG00/Set B | WS00.19-P-0001-40B |
| 220 589 01 99 72 Blade box, lower part | FG00/Set B | WS00.19-P-0001-41B |
| 220 589 01 99 74 Plastic can 151 x 99 x 44 | FG00/54/Set B | WS00.19-P-0001-42B |
| 220 589 01 99 75 Plastic can 61 x 54 x 38 | FG00/54/Set B | WS00.19-P-0001-43B |
| 220 589 01 99 76 Plastic can 53 x 37 x 24 | FG00/54/Set B | WS00.19-P-0001-44B |
| 220 589 01 99 77 Adhesive labels | FG00/54/Set B | WS00.19-P-0001-45B |
| 220 589 01 99 78 Crimp set overview | FG00/Set B | WS00.19-P-0002-05B |
| 220 589 01 99 80 MCP 2.8 ELA crimping set | FG00/Set B | WS00.19-P-0002-06B |
| 220 589 01 99 81 MCP 2.8 ELA crimping set | FG00/Set B | WS00.19-P-0002-07B |
| 220 589 01 99 82 JPT ELA crimp set | FG00/54/Set B | WS00.19-P-0002-08B |
| 220 589 01 99 83 MLK 1.2 crimping set | FG00/Set B | WS00.19-P-0002-09B |
| 220 589 01 99 84 MLK 1.2 ELA crimping set | FG00/Set B | WS00.19-P-0002-10B |
| 220 589 01 99 85 MQS crimping set | FG00/54/Set B | WS00.19-P-0002-11B |
| 220 589 01 99 86 MQS ELA crimping set | FG00/54/Set B | WS00.19-P-0002-12B |
| 220 589 01 99 90 MCP 2.8 ELA positioner | FG00/Set B | WS00.19-P-0002-13B |
| 220 589 01 99 91 MCP 2.8 ELA positioner | FG00/Set B | WS00.19-P-0002-14B |
| 220 589 01 99 92 Positioner, JPT ELA | FG00/54/Set B | WS00.19-P-0002-15B |
| 220 589 01 99 93 MLK 1.2 positioner | FG00/Set B | WS00.19-P-0002-16B |
| 220 589 01 99 94 MLK 1.2 ELA positioner | FG00/Set B | WS00.19-P-0002-17B |
| 220 589 01 99 95 Positioner, MQS | FG00/54/Set B | WS00.19-P-0002-18B |
| 220 589 01 99 96 Positioner, MQS ELA | FG00/54/Set B | WS00.19-P-0002-19B |
| 220 589 02 01 00 Open-end wrench | FG 46/set B | WS46.00-P-0074B |
| 220 589 02 22 00 Software service CD | FG 82/Set B | WS82.00-P-0118B |
| 220 589 02 27 00 Puller | FG 64/Kit K | WS64.00-P-0105K |
| 220 589 02 31 00 Clamping jaws | FG 35/Set B | WS35.00-P-0175B |
| 220 589 02 43 00 Extractor tool | FG 35/Set B | WS35.00-P-0173B |
| 220 589 02 63 00 Trunk lid spring holder | FG 88/Kit K | WS88.00-P-0021K |
| 220 589 02 99 00 Wiring harness repair kit | FG 00 FG 54/83/Set B | WS00.19-P-0002B |
| 220 589 02 99 70 Case empty | FG00/Set B | WS00.19-P-0002-01B |
| 220 589 03 22 00 Software service CD | FG 82/Set B | WS82.00-P-0123B |
| 220 589 03 23 00 Template | FG 63/Set K | WS63.00-P-0113K |
| 220 589 03 31 00 Trunk lid spring tensioner | FG 88/Kit K | WS88.00-P-0022K |
| 220 589 03 43 00 Extraction and insertion tool | FG 33/Set C | WS33.00-P-0118C |
| 220 589 03 63 00 Dispensing gun | FG 42/Set B | WS42.00-P-0076B |
| 220 589 03 99 00 Positioning mount with quick-release fitting | FG 00/Set B | WS00.19-P-0003B |
| 220 589 04 22 00 Software service CD | FG 82/Set B | WS82.00-P-0130B |
| 220 589 04 23 00 Template | FG 63/Set K | WS63.00-P-0114K |
| 220 589 04 31 00 Clamping pliers | FG 72/set K | WS72.00-P-0022K |
| 220 589 04 31 03 Thrust piece | FG72/Set K | WS72.00-P-0022-03K |
| 220 589 04 43 00 Insertion tool | FG 35/Set B | WS35.00-P-0174B |
| 220 589 04 63 00 Repair set | FG 42/Set B | WS42.00-P-0077B |
| 220 589 04 99 00 New passenger car wiring harness repair kit | FG 00 FG 46/47/54/82/83/Set B | WS00.19-P-0006B |
| 220 589 04 99 01 Crimping set overview | FG00/Set B | WS00.19-P-0006-01B |
| 220 589 04 99 10 MCP 1.2 ELA crimping set | FG00/Set B | WS00.19-P-0006-10B |
| 220 589 04 99 11 MCP 1.2 crimping set | FG00/Set B | WS00.19-P-0006-11B |
| 220 589 04 99 20 MCP 1.2 ELA positioner | FG00/Set B | WS00.19-P-0006-20B |
| 220 589 04 99 30 MCP 1.2 blade | FG00/Set B | WS00.19-P-0006-30B |
| 220 589 05 22 00 Software service CD | FG 82/Set B | WS82.00-P-0137B |
| 220 589 05 23 00 Inspection and welding gage | FG 63/Set K | WS63.00-P-0115K |
| 220 589 05 99 00 Electrical connection kit | FG 00/01/09/13/15/20/25/42/43/47/54/72/Set B | WS00.00-P-0279Z |
| 220 589 05 99 01 Empty case | FG54/Set B | WS54.00-P-0050-29B |
| 220 589 06 23 00 Templates | FG 88/Set K | WS88.00-P-0020K |
| 220 589 06 43 00 Extraction and insertion tool | FG 33/35/Set B | WS33.00-P-0120C |
| 220 589 07 23 00 Template | FG 63/Set K | WS63.00-P-1116K |
| 220 589 07 43 00 Extraction and press-in tools | FG 32/Set B | WS32.00-P-0080B |
| 220 589 07 43 99 Intermediate piece | FG32/Set B | WS32.00-P-0080-01B |
| 220 589 08 23 00 Template | FG 63/Set K | WS63.00-P-1117K |
| 220 589 09 23 00 Template | FG 63/Set K | WS63.00-P-0118K |
| 220 589 10 23 00 Puller | FG 62/Set K | WS62.00-P-0106K |
| 220 589 12 23 00 Mounts | FG 35/Set C | WS35.00-P-0177C |
| 220 589 13 23 00 Check and welding gauges | FG 63/Kit K | WS63.00-P-1120K |
| 220 589 14 23 00 Inspection and welding gages | Group 63/Set K | WS63.00-P-1121K |