Special tools: Passenger cars: Part numbers 126 - WS00.01-Z-9126AZ
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 126 589 00 01 00 Open-end wrench | FG 20/Set B | WS20.00-P-0059B |
| 126 589 00 01 00 Open-end wrench | FG 41/Set B | WS41.00-P-0002B |
| 126 589 00 10 00 Screwdriver bit | FG 46/91/14/32/Set B | WS46.00-P-0033B |
| 126 589 00 15 00 Drift | FG 35/Set C | WS35.00-P-0057C |
| 126 589 00 16 00 Turning handle | FG 46/Set C | WS46.00-P-0034C |
| 126 589 00 21 00 Measuring device | FG 35/Set C | WS35.00-P-0058C |
| 126 589 00 28 00 Cleaning pad | FG 42/Set B | WS42.00-P-0022B |
| 126 589 00 31 00 Spreader | FG 35/Set C | WS35.00-P-0059C |
| 126 589 00 34 00 Pulling arms | FG 26/Set C | WS26.00-P-0036C |
| 126 589 00 35 00 Assembly tool | FG 27/Set C | WS27.00-P-0020C |
| 126 589 00 40 00 Bracket | FG 15/Set B | WS15.00-P-0011B |
| 126 589 00 90 00 Ignition unit | FG 91/Set B | WS91.00-P-0005B |
| 126 589 00 90 22 Ignition cable | FG 91/Set B | WS91.00-P-0005-01B |
| 126 589 01 35 00 Installation tool, Nippondenso | FG 83/Set K | WS83.00-P-0009K |
| 126 589 01 40 00 Holding wrench, Nippondenso | FG 83/Set K | WS83.00-P-0010K |
| 126 589 01 59 00 Assembly tool, Nippondenso | FG 83/Set K | WS83.00-P-0011K |
| 126 589 02 09 00 Socket wrench bit | FG 26/27/28/35/Set B | WS26.00-P-0038B |
| 126 589 02 09 00 Socket wrench bit | FG 26/27/28/35/Set B | WS27.00-P-0022B |
| 126 589 02 09 00 Socket wrench bit | FG 26/27/28/35/Set B | WS28.00-P-0025B |
| 126 589 02 09 00 Socket wrench bit | FG 26/27/28/35/Set B | WS35.00-P-0062B |
| 126 589 02 15 00 Assembly drift | FG 35/Set C | WS35.00-P-0063C |
| 126 589 02 35 00 Assembly tool, Delco R4 and A6 | FG 83/Set K | WS83.00-P-0012K |
| 126 589 02 59 00 Assembly tool, Nippondenso | FG 83/Set K | WS83.00-P-0013K |
| 126 589 03 14 00 Sleeve | FG 27/Set C | WS27.00-P-0023C |
| 126 589 03 15 00 Drift | FG 41/Set C | WS41.00-P-0003C |
| 126 589 03 21 00 Test adapter | FG 83/Set B | WS83.00-P-0014B |
| 126 589 04 09 00 Socket wrench bit | FG 40/Set A | WS40.00-P-0023A |
| 126 589 04 14 00 Sleeve | FG 27/Set C | WS27.00-P-0024C |
| 126 589 04 15 00 Drift punch | FG 35/Set C | WS35.00-P-0064C |
| 126 589 04 21 00 Test adapter | FG 83/Set B | WS83.00-P-0015B |
| 126 589 04 23 00 Drilling and welding gauge | FG 62/Set K | WS62.00-P-0010K |
| 126 589 04 31 00 Parallel rest | FG 27/Set C | WS27.00-P-0025C |
| 126 589 05 21 00 Test adapter for electronic CC | FG 54/Set B | WS54.00-P-0006B |
| 126 589 06 21 00 Measuring screw | FG 27/Set C | WS27.00-P-0026C |
| 126 589 06 33 00 Puller, Nippondenso | FG 83/Set K | WS83.00-P-0016K |
| 126 589 06 43 00 Assembly tool, Nippondenso | FG 83/Set K | WS83.00-P-0017K |
| 126 589 07 33 00 Removal tool, Nippondenso | FG 83/Set K | WS83.00-P-0018K |
| 126 589 08 21 00 Contact arm | FG 33/Set C | WS33.00-P-0028C |
| 126 589 08 21 00 Contact arm | FG 35/Set C | WS35.00-P-0065C |
| 126 589 09 21 00 Test adapter for ABS | FG 42/Set B | WS42.00-P-0023B |
| 126 589 10 14 00 Sleeve | FG 27/Set C | WS27.00-P-0027C |
| 126 589 10 63 00 Mounting plate | FG 26/Set C | WS26.00-P-0040C |
| 126 589 10 63 00 Mounting plate | FG 27/Set C | WS27.00-P-0028C |
| 126 589 11 63 00 Emission probe | FG 07/Set B | WS07.00-P-0036B |
| 126 589 12 63 00 Funnel | FG 27/Set A | WS27.00-P-0029A |
| 126 589 12 63 00 Funnel | FG 32/67/Set A | WS32.00-P-0016A |
| 126 589 13 63 00 Mounting fixture | FG 46/Set A | WS46.00-P-0035A |
| 126 589 14 21 00 Tester | FG 28/Set B | WS28.00-P-0026B |
| 126 589 14 21 00 Tester | FG 32/Set B | WS32.00-P-0017B |
| 126 589 14 21 00 Tester | FG 35/Set B | WS35.00-P-0066B |
| 126 589 14 21 00 Tester | Group 77/Set B | WS77.00-P-0051B |
| 126 589 15 63 00 Protective adapter | FG 42/Set B | WS42.00-P-0024B |
| 126 589 20 63 00 27-pin test cable | FG 80/Set C | WS80.00-P-0001C |
| 126 589 20 63 00 27-pin test cable | FG 83/Set C | WS83.00-P-0019C |