Electronic stability program (ESP): DTC C1140 and/or C1145 - AF42.45-P-8107A

MODEL 203, 209 up to 1.2.03 

OPERATION NO. OF OPERATION TEXTS OR STANDARD TEXTS AND FLAT RATES

Division	Op. no.	Operation text	Time	Acc. no.	Code
P	541011	Perform quick test	004 WU	-	-
P	023753	Replace cable on control module connector (after checking ESP-DTC C1140 and/or C1145)	012 WU	-	-

Damage code	Cause	Remedy
	Increased transition resistance can occur due to an oxidation layer on the contact sockets 18/19/20 in the connector to the ESP control module.	Replacing control module does not permanently eliminate the problem. If the tests prescribed in STAR DIAGNOSIS do not result in a current error please proceed as indicated in the work instructions ↓
	This leads to an offset error of the brake pressure sensor and to DTC entries FC C1140 and/or C1145	Repair wiring harness connector Due to bottlenecks we request you to only order the quantities of parts actually required.	SM42.45-P-0001A