Remove/install left side wall lining in trunk - AR68.30-P-4601QA

Model 209.4 

Fig 1: Identifying Left Side Wall Lining In Trunk Components

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Open trunk lid
2	Unclip threaded clip (2) from left side wall lining (1)
3	Unclip clips (3) from left side wall lining (1)	Mounting wedge	Fig 2
4	Press bottom rear center section paneling (5) to side
5	Unclip trunk illumination (4) from left side wall lining (1)	Do not separate connector.
6	Remove left side wall lining (1)
7	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA