Remove/install pedal assembly - AR29.10-P-0300QA

MODEL 203, 209.3 /4 with TRANSMISSION 722.6

MODEL 203, 209.3 with TRANSMISSION 716.6 with CODE (424) Sequentronic (SEQ) manual transmission

Shown on model 209.4

Fig 1: Identifying Pedal Assembly Components - Shown On Model 209.4

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
1	Remove cover below instrument panel (left)		AR68.10-P-1500P
2	Remove noise absorber
3	Remove cover (1)
4	Pry locking clip (2) off bolt (3)
5	Pull out pin (3)	Check bolt (3) for damage and wear and replace if necessary.
		Installation: Grease bolt (3) lightly.	*BR00.45-Z-1001-06A
6	Unscrew nuts (4).		*BA43.10-P-1002-01A
7	Remove pedal assembly	Do not damage wiring harness.
8	Install in the reverse order

PNEUMATIC BRAKE BOOSTER

Number	Designation		Model 203	Model 209
BA43.10-P-1002-01A	Nut of brake booster carrier on front end	Nm	20	20

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1001-06A	Long-life grease	A 000 989 63 51