Remove/install radiator paneling - AR88.40-P-4001Q

MODEL 209 

Fig 1: Identifying Radiator Paneling Components

Courtesy of MERCEDES-BENZ USA

Shown on model 209 

	Remove
	Risk of injury  to fingers being jammed or pinched  when removing, installing or aligning hoods, doors, trunk lid/tailgate or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Open engine hood		AR88.40-P-1000Q
2	Remove bolts (1)
3	Disengage radiator paneling (2)	Push catch lugs (3) upward using a suitable tool.
4	Push lower area of radiator paneling (2) toward rear and remove
	Install
5	Put radiator paneling on (2) and push toward front	The catch lugs (3) should catch audibly in the radiator paneling (2).
6	Screw in bolts (1)
7	Close engine hood		AR88.40-P-1000Q