Remove/install center console - AR68.20-P-2000QBS (Black Series)

MODEL 209 with CODE (P98) Black Series 

Fig 1: Removing/Installing Center Console - Black Series (1 Of 2)

Courtesy of MERCEDES-BENZ USA

Fig 2: Removing/Installing Center Console - Black Series (2 Of 2)

Courtesy of MERCEDES-BENZ USA

	Remove/install
	1	Remove cover on gearshift lever	AR68.20-P-2310QBS
2	Remove ashtray housing (3)	Installation:  Check ashtray housing mechanism (3) for proper function, if necessary loosen threaded connection of center console (1) and tighten center console (1) without tension.	AR68.20-P-2400P
3	Unclip covers (4) in installation opening of ashtray housing (3)
4	Remove bolts (5)	Installation:  Ensure that center console (1) is installed without tension.
5	Remove bolts (7) on shift gate	Installation:  Ensure that center console (1) is installed without tension.
6	Remove bolts (8)	Installation:  Ensure that center console (1) is installed without tension.
7	Loosen bolt (6) approx. one half turn on left and right	To unlock arresting pins on center console (1)
8	Pull out floor covering at transition area between center console (1) and upper control panel in front passenger footwell and disconnect electrical connectors (9)
9	Remove center console (1)
10	Re-install in opposite order