Remove/install cradle for portable CTEL telephone - AR82.70-P-8918Q

MODEL 209 with CODE (854) MB portable cellular telephone except CODE (352a) COMAND operating and display system 

Fig 1: Identifying Cradle For Portable CTEL Telephone Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Lift off bracket for cell phone (1)	Remove out of bracket for handset (4).
2	Remove screws (3)
3	Lift off bracket for handset (4)
4	Remove screws (5)
5	Lift off base bracket (6)
6	Detach carpet (2)	Detach until handset transmitter and receiver connector (X39/5) and antenna connection (7) are accessible.
7	Disconnect handset transmitter and receiver connector (X39/5)
8	Disconnect antenna connector (7)
9	Connect handset transmitter and receiver connector (X39/5) to antenna connection (7)	Join using cord (8).
10	Pull handset transmitter and receiver connector (X39/5) and antenna connection (7) upward out of paneling	Installation:  Using rope (8) pull handset transmitter and receiver connector (X39/5) and antenna connection (7) downward through paneling.
11	Install in the reverse order
12	Perform function check