Remove/install lamp unit - AR82.10-P-4730Q
MODEL 209 during removal of both lamp units
| Remove/install | |||
|---|---|---|---|
| Risk of death
caused by high voltage levels present at xenon headlamps. Risk of explosion/fire hazard due to highly flammable substances in the area of damaged xenon bulbs Risk of injury due to UV light, hot components on xenon headlamps and glass splinters when xenon bulbs burst Risk of poisoning caused by inhalation of mercury vapors and by toxic salts and mercury compounds being ingested or coming into contact with skin |
Do not come into contact with parts that are under high voltage. Persons with active electronic implants (e.g. heart pacemakers) must never work on xenon headlamps. Switch off entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the hazard area. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A | |
| 1 | Withdraw ignition key | ||
| 2 | Open engine hood and move to vertical position | AR88.40-P-1000Q | |
| 3 | Remove front bumper | Vehicles without code P98 Black Series | AR88.20-P-2000Q |
| Vehicles with code P98 Black Series | AR88.20-P-2000QBS | ||
| 4 | Remove bolts (1, 3) | ||
| 5 | Disconnect connectors from left front lamp unit (E1), right front lamp unit (E2) | ||
| 6 | Remove left front lamp unit (E1), right front lamp unit (E2) | ||
| 7 | Detach vacuum line of positioning element | ||
| 8 | Install in the reverse order | ||
| 9 | Set electrical zero position of headlamp range adjustment using STAR DIAGNOSIS | Code 614 Bi-xenon headlamp unit and code 615 Bi-xenon headlamp unit with integrated curve illumination | |
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 10 | Check adjustment of headlamps, adjust if necessary | ||
| Check and correct headlamp adjustment | AP82.10-P-8260P | ||
| 11 | Check headlamp cleaning system for proper function | with code 600 Headlamp cleaning system |