Remove/install bass module speaker - AR82.62-P-7839QA
MODEL 209.4 with CODE (810) sound system
MODIFICATION NOTES
| 11.2.04 | Disconnect/connect/remove ground lead from battery |
| Remove/install | |||
|---|---|---|---|
| 1 | Remove left and right rear seat cushions | AR91.12-P-1020QA | |
| 2 | Disconnect electrical connector (1). | ||
| 3 | Cut tie strap (arrow) | ||
| 4 | Screw off the nuts (2) on both sides | ||
| 5 | Lift resonant body (3) front slightly and remove | ||
| 6 | Unclip and remove molding (4) | ||
| 7 | Unscrew bolts (5) | ||
| 8 | Remove cap (6) | ||
| 9 | Remove bolts (7) | ||
| 10 | Lift subwoofer slightly (H4/29) | ||
| 11 | Disconnect electrical connector (1) | ||
| 12 | Remove subwoofer (H4/29) | ||
| 13 | Install in the reverse order | ||
| 14 | Perform function check |