Removing and installing paneling in trunk - AR68.30-P-4600P
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 203.0
| Removing, installing | |||
|---|---|---|---|
| 1 | Remove trunk floor paneling (1) | ||
| 2 | Unscrew bolt (9) | ||
| *BA68.50-P-1002-03A | |||
| 3 | Remove anchoring lugs (8) | ||
| 4 | Remove cover behind rear seat (7) | ||
| 5 | Unclip spreading clips (3) | ||
| 6 | Remove bottom rear center section paneling (2) | ||
| 7 | Unclip clips (4) | ||
| 8 | Remove left paneling (5) | ||
| 9 | Unclip clips (4) | ||
| 10 | Remove right paneling (6) | ||
| 11 | Install in the reverse order |
| Number | Designation | Model 203 | |
|---|---|---|---|
| BA68.50-P-1002-03A | Screw for anchoring lug at front in trunk. | Nm | 20 |