Special tools: Passenger cars: Part numbers 201 - WS00.01-Z-9201AZ
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 201 589 00 01 00 Open wrench | FG 46/Set B | WS46.00-P-0075B |
| 201 589 00 01 00 Open-end wrench | FG 41/set B | WS41.00-P-0009B |
| 201 589 00 09 00 Flexible head wrench socket | FG 35/Set B | WS35.00-P-0118B |
| 201 589 00 09 00 Socket | FG 28/Set B | WS28.00-P-0029B |
| 201 589 00 15 00 Drift | FG 26/Set C | WS26.00-P-0116C |
| 201 589 00 15 00 Drift | GROUP28/Set C | WS28.00-P-0030C |
| 201 589 00 15 00 Drift punch | FG 35/Set B | WS35.00-P-0119B |
| 201 589 00 27 00 Cross-brace | FG 63/64/Set K | WS64.00-P-0012K |
| 201 589 00 33 00 Puller | FG 33/Set C | WS33.00-P-0044C |
| 201 589 00 33 00 Puller | FG 35/Set C | WS35.00-P-0120C |
| 201 589 00 34 00 Collet chuck | FG 33/Set B | WS33.00-P-0155B |
| 201 589 00 34 00 Collet chuck | FG 35/Set C | WS35.00-P-0121C |
| 201 589 00 37 00 Pliers | FG 27/Set C | WS27.00-P-0039C |
| 201 589 00 40 00 Holder | FG 27/Set B | WS27.00-P-0040B |
| 201 589 00 43 00 Installation tool | FG 35/Set C | WS35.00-P-0122C |
| 201 589 00 51 00 Spot weld milling cutter | Group 60/61/62/63/64/65/Set K | WS60.00-P-0033K |
| 201 589 00 51 01 Milling bit crown | Group 60/61/62/63/64/65/Set K | WS60.00-P-0033-01K |
| 201 589 01 14 00 Sleeve | FG 27/Set C | WS27.00-P-0041C |
| 201 589 01 15 00 Installation punch | FG 35/Set C | WS35.00-P-0123C |
| 201 589 01 31 00 Spreader | FG 35/Set C | WS35.00-P-0124C |
| 201 589 01 33 00 Puller | FG 33/Set B | WS33.00-P-0179B |
| 201 589 01 33 00 Puller | FG 35/Set B | WS35.00-P-0125B |
| 201 589 01 33 00 Puller | FG 46/Set B | WS46.00-P-0053B |
| 201 589 01 34 00 Collet chuck | FG 28/35/33/Set C | WS35.00-P-0126C |
| 201 589 01 43 00 Installation tool | FG 33/Set C | WS33.00-P-0045C |
| 201 589 01 43 00 Installation tool | FG 35/Set C | WS35.00-P-0127C |
| 201 589 01 61 00 Set of shaped blocks | FG 60/Set K | WS60.00-P-0034K |
| 201 589 01 63 00 Stops | FG 35/Set C | WS35.00-P-0128C |
| 201 589 01 68 00 Knife | FG 68/Set K | WS68.00-P-0004K |
| 201 589 02 14 00 Sleeve | FG 27/Set C | WS27.00-P-0042C |
| 201 589 02 15 00 Installation punch | FG 35/Set C | WS35.00-P-0129C |
| 201 589 02 21 00 Measuring device | FG 40/Set B | WS40.00-P-0033B |
| 201 589 02 31 00 Plate | FG 35/Set C | WS35.00-P-0130C |
| 201 589 02 34 00 Collet chuck | FG 35/Set C | WS35.00-P-0131C |
| 201 589 02 43 00 Removal and installation tool | FG 33/Set C | WS33.00-P-0046C |
| 201 589 02 43 00 Removal and installation tool | FG 35/Set C | WS35.00-P-0132C |
| 201 589 02 61 00 Set of shaped blocks | FG 60/Set K | WS60.00-P-0035K |
| 201 589 03 15 00 Drift punch | FG 35/Set C | WS35.00-P-0133C |
| 201 589 03 23 00 Testing and welding gauge | FG 62/Set K | WS62.00-P-0019K |
| 201 589 03 27 00 Pulling device | FG 60/Set K | WS60.00-P-0036K |
| 201 589 03 31 00 Assembly stand | FG 35/Set C | WS35.00-P-0134C |
| 201 589 03 34 00 Clamp | FG 33/Set C | WS33.00-P-0048C |
| 201 589 03 43 00 Puller and installation tool | FG 35/Set C | WS35.00-P-0135C |
| 201 589 03 59 00 Assembly tool | FG 27/Set C | WS27.00-P-0043C |
| 201 589 04 21 00 Measuring device | FG 35/Set C | WS35.00-P-0136C |
| 201 589 04 34 00 Collet chuck | FG 26/Set C | WS26.00-P-0047C |
| 201 589 05 15 00 Drive shaft | FG 27/Set C | WS27.00-P-0044C |
| 201 589 05 21 00 Measuring device | FG 35/Set C | WS35.00-P-0137C |
| 201 589 05 27 00 Pulling device | FG 60/Set K | WS60.00-P-0037K |
| 201 589 05 34 00 Collet chuck | FG 26/Set C | WS26.00-P-0048C |
| 201 589 05 63 00 Thrust piece | FG 35/Set B | WS35.00-P-0138B |
| 201 589 05 63 00 Thrust piece | FG 46/Set B | WS46.00-P-0054B |
| 201 589 06 15 00 Drift punch | FG 46/Set C | WS46.00-P-0055C |
| 201 589 06 21 00 Check screw | FG 46/Set B | WS46.00-P-0056B |
| 201 589 06 21 00 Check screw | FG 40/Set B | WS40.00-P-0034B |
| 201 589 06 33 00 Installation tool | FG 33/Set C | WS33.00-P-0051C |
| 201 589 06 33 99 Repair kit | FG33/Set C | WS33.00-P-0051-01C |
| 201 589 06 34 00 Collet chuck | FG 26/Set C | WS26.00-P-0049C |
| 201 589 07 15 00 Drift | FG 41/Set C | WS41.00-P-0010C |
| 201 589 07 21 00 Measuring screw | FG 27/Set C | WS27.00-P-0045C |
| 201 589 08 15 00 Alignment punch | FG 25/Set B | WS25.00-N-0002B |
| 201 589 08 21 00 Check screw | FG 40/Set B | WS40.00-P-0035B |
| 201 589 08 21 00 Check screw | FG 46/Set B | WS46.00-P-0057B |
| 201 589 08 23 00 Welding gauge | FG 62/Set K | WS62.00-P-0020K |
| 201 589 08 43 00 Installation tool | FG 46/Set B | WS46.00-P-0058B |
| 201 589 09 33 00 Puller | FG 46/Set B | WS46.00-P-0059B |
| 201 589 09 43 00 Extraction and insertion tool | FG 41/Set C | WS41.00-P-0011C |
| 201 589 10 23 00 Bracket | FG 33/Set A | WS33.00-P-0060A |
| 201 589 10 31 00 Set of clamps | FG 60/62/63/Set K | WS60.00-P-0038K |
| 201 589 10 33 00 Impact extractor | FG 33/Set C | WS33.00-P-0052C |
| 201 589 10 33 00 Impact extractor | FG 35/Set C | WS35.00-P-0139C |
| 201 589 10 43 00 Puller and installation tool | FG 35/Set C | WS35.00-P-0140C |
| 201 589 10 63 00 Set of painting covers | FG 98/Set K | WS98.00-P-0008K |
| 201 589 11 31 00 Pulling device | FG 40/Set B | WS40.00-P-0036B |
| 201 589 11 43 00 Puller and installation tool | FG 35/Set C | WS35.00-P-0141C |
| 201 589 12 21 00 Level carrier | FG 40/Set C | WS40.00-P-0037C |
| 201 589 12 43 00 Assembly tool | FG 27/Set C | WS27.00-P-0046C |
| 201 589 13 21 00 Vacuum tester | FG 25/09/Set B | WS25.00-P-0012B |
| 201 589 13 21 00 Vacuum tester | FG 42/43/09/14/Set B | WS42.00-P-0036B |
| 201 589 13 33 00 Puller | FG 46/Set B | WS46.00-P-0060B |
| 201 589 14 33 00 Puller | FG 46/Set B | WS46.00-P-0061B |
| 201 589 14 33 00 Puller | FG 82/Set B | WS82.00-P-0136B |