Special tools: Passenger cars: Part numbers 000 - WS00.01-Z-9000AZ
WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| 000 589 00 21 00 Test box | FG 00/01/07/Set B | WS00.00-P-0034B |
| 000 589 00 34 00 Chuck | FG 33/Set C | WS33.00-P-0001C |
| 000 589 00 63 00 Unlocking tool | FG 91/Set B | WS91.00-P-0049B |
| 000 589 00 68 00 Cleaning kit | FG 07/Set C | WS07.00-P-0001C |
| 000 589 01 10 00 Torx bit set | FG 00/14/91 | WS00.00-P-0001Z |
| 000 589 01 21 00 Calibration device | FG 54/Set B | WS54.00-P-0022B |
| 000 589 01 25 00 Hand pressure gun | FG 01/Set B | WS01.00-N-3060B |
| 000 589 01 25 00 Hand pressure gun | FG 77/Set B | WS77.00-P-0040B |
| 000 589 01 34 00 Collet chuck | FG 35/Set C | WS35.00-P-0001C |
| 000 589 01 34 00 Collet chuck | FG 33/Set C | WS33.00-P-0002C |
| 000 589 01 40 00 Bracket | FG 00 | WS00.00-P-0244Z |
| 000 589 02 34 00 Collet chuck | FG 33/Set C | WS33.00-P-0074C |
| 000 589 02 34 00 Collet chuck | FG 35/Set C | WS35.00-P-0002C |
| 000 589 03 10 00 Screwdriver bit | FG 01/Set B | WS01.00-P-0054B |
| 000 589 03 34 00 Thrust piece | FG 35/Set C | WS35.00-P-0003C |
| 000 589 04 10 00 Screwdriver insert | FG 01/Set B | WS01.00-P-0055B |
| 000 589 04 14 00 Tensioning strap | FG 03/Set C | WS03.00-P-0001C |
| 000 589 04 37 00 Pliers | FG 91/Set B | WS91.00-P-0045B |
| 000 589 05 07 00 Socket | FG 01/Set B | WS01.00-P-0001B |
| 000 589 10 53 00 Reamer | FG 05/Set C | WS05.00-P-0001C |
| 000 589 10 63 00 Eye | FG 77/Set B | WS77.00-P-0057B |
| 000 589 10 68 00 Cylinder brush | FG 05/Set C | WS05.00-P-0002C |
| 000 589 10 99 00 Tool kit | FG 00 FG 05/07/23/set A | WS00.00-P-0030Z |
| 000 589 10 99 01 Torque wrench | FG 00/05/07/23/Set A | WS00.00-P-0030-01Z |
| 000 589 10 99 06 Socket wrench attachment, twelve-point, 13 mm | FG 00 | WS00.00-P-0030-06Z |
| 000 589 10 99 07 Socket wrench attachment, twelve-point, 14 mm | FG 00 | WS00.00-P-0030-07Z |
| 000 589 10 99 08 Socket wrench attachment, twelve-point, 15 mm | FG 00 | WS00.00-P-0030-08Z |
| 000 589 10 99 09 Socket wrench attachment, twelve-point, 17 mm | FG 00 | WS00.00-P-0030-09Z |
| 000 589 10 99 10 Socket wrench attachment, twelve-point, 19 mm | FG 00 | WS00.00-P-0030-10Z |
| 000 589 10 99 11 Socket wrench attachment, twelve-point, 22 mm | FG 00 | WS00.00-P-0030-11Z |
| 000 589 10 99 12 Socket wrench attachment, twelve-point, 24 mm | FG 00 | WS00.00-P-0030-12Z |
| 000 589 10 99 13 Socket wrench attachment, twelve-point, 27 mm | FG 00 | WS00.00-P-0030-13Z |
| 000 589 10 99 14 Socket wrench attachment, twelve-point, 30 mm | FG 00 | WS00.00-P-0030-14Z |
| 000 589 10 99 15 Socket wrench attachment, twelve-point, 32 mm | FG 00 | WS00.00-P-0030-15Z |
| 000 589 10 99 16 Open-end wrench bit 13 mm | FG 00 | WS00.00-P-0030-16Z |
| 000 589 10 99 17 Open end wrench attachment, 15 mm | FG 00 FG 05/Set A | WS00.00-P-0030-17Z |
| 000 589 10 99 18 Open end wrench attachment, 17 mm | FG 00 FG 05/07/set A | WS00.00-P-0030-18Z |
| 000 589 10 99 19 Open end wrench attachment, 19 mm | FG 00 | WS00.00-P-0030-19Z |
| 000 589 10 99 20 Open end wrench attachment, 22 mm | FG 00 | WS00.00-P-0030-20Z |
| 000 589 10 99 21 Open end wrench attachment, 24 mm | FG 00 | WS00.00-P-0030-21Z |
| 000 589 10 99 22 Open end wrench attachment, 27 mm | FG00 FG07/Set A | WS00.00-P-0030-22Z |
| 000 589 10 99 23 Open end wrench attachment, 30 mm | FG 00 | WS00.00-P-0030-23Z |
| 000 589 10 99 24 Box wrench attachment, 13 mm | FG 00 | WS00.00-P-0030-24Z |
| 000 589 10 99 25 Box wrench attachment, 15 mm | FG 00 | WS00.00-P-0030-25Z |
| 000 589 10 99 26 Box wrench attachment, 17 mm | FG 00 | WS00.00-P-0030-26Z |
| 000 589 10 99 27 Box wrench attachment, 19 mm | FG 00 | WS00.00-P-0030-27Z |
| 000 589 10 99 28 Box wrench attachment, 22 mm | FG 00 | WS00.00-P-0030-28Z |
| 000 589 10 99 29 Box wrench attachment, 24 mm | FG 00 | WS00.00-P-0030-29Z |
| 000 589 10 99 30 Box wrench attachment, 27 mm | FG 00 | WS00.00-P-0030-30Z |
| 000 589 10 99 31 Square shaft 1/2" | FG 00 | WS00.00-P-0030-31Z |
| 000 589 10 99 32 Ratchet 1/2" | FG 00 | WS00.00-P-0030-32Z |
| 000 589 11 53 00 Reamer | FG 05/Set C | WS05.00-P-0003C |
| 000 589 12 28 00 Knife | FG 07/31/32/42/43/47/83/Set D | WS32.00-N-3046D |
| 000 589 12 28 02 Replacement knife | FG 31/32/42/43/47/83/set D | WS32.00-N-3046-01D |
| 000 589 13 99 00 Wiring harness repair kit, basic | FG 00 FG 14/46/47/54/82/83/Set B | WS00.19-P-0007B |
| 000 589 13 99 01 Crimp set overview | FG00/54/Set B | WS00.19-P-0007-01B |
| 000 589 13 99 02 blade insert | FG00/54/Set B | WS00.19-P-0007-02B |
| 000 589 13 99 03 Empty case | FG00/54/Set B | WS00.19-P-0007-03B |
| 000 589 13 99 10 MCP 2.8 ELA crimping set | FG00/54/Set B | WS00.19-P-0007-10B |
| 000 589 13 99 30 MCP 2.8/Fl. blade 2.8/JPT/SPT | FG00/54/83/Set B | WS00.19-P-0007-30B |
| 000 589 15 53 00 Reamer | FG 05/Set C | WS05.00-P-0004C |
| 000 589 15 99 00 Set of adapter plates for resetting device | FG 42/Set A | WS42.00-P-0079A |
| 000 589 18 31 00 Brake pedal jack | FG 40/42/Set B | WS40.00-P-0001B |
| 000 589 18 99 00 Heli-coil tool | FG 00 | WS00.00-P-0271Z |
| 000 589 20 21 00 Hardness tester | FG 03/Set C | WS03.00-P-0002C |
| 000 589 21 53 00 Reamer | FG 05/Set C | WS05.00-P-0005C |
| 000 589 24 07 00 Box wrench for Allen socket | FG 18/Set A | WS18.00-P-0001A |
| 000 589 24 07 00 Box wrench for Allen socket | FG 26/Set A | WS26.00-P-0001A |
| 000 589 24 07 00 Box wrench for Allen socket | FG 35/Set A | WS35.00-P-0004A |
| 000 589 25 33 00 Internal extractor | FG 00/15/26 | WS00.00-P-0050Z |
| 000 589 26 33 00 Internal extractor | FG 26/Set C | WS26.00-P-0002C |
| 000 589 26 33 00 Internal extractor | GROUP 28/Set C | WS28.00-P-0084C |
| 000 589 26 68 00 Brake caliper brush | FG 42/Set A | WS42.00-P-0002A |
| 000 589 27 33 00 Internal extractor | FG 03/Set C | WS03.00-P-0049C |
| 000 589 27 33 00 Internal extractor | FG 00/26/Set C | WS26.00-P-0003C |
| 000 589 28 33 00 Puller dia. 28-37 mm | FG 00/03/05/26/27/28/33/43/46/Set B | WS00.00-N-3026Z |
| 000 589 29 33 00 Internal extractor | FG 00 FG 05/13/26/27/28/33/42/set C | WS00.00-N-3027Z |
| 000 589 29 33 00 Internal extractor | FG 26/Set C | WS26.00-P-0110C |
| 000 589 29 33 00 Internal extractor | GROUP 28/Set C | WS28.00-P-3084C |
| 000 589 30 16 00 Hexagon ratchet, 10 mm | FG 00 | WS00.00-P-0002Z |
| 000 589 30 33 00 Internal extractor | FG 08/Set B | WS08.00-P-0010B |
| 000 589 30 33 00 Internal extractor | FG 26/Set C | WS26.00-P-0113C |
| 000 589 30 33 00 Internal extractor | GROUP 28/Set C | WS28.00-P-0001C |
| 000 589 31 16 00 Hexagon ratchet, 13 mm | FG 00 | WS00.00-P-0003Z |
| 000 589 31 33 00 Internal extractor | FG 27/Set C | WS27.00-P-0154C |
| 000 589 31 33 00 Internal extractor | FG 28/33/Set C | WS33.00-N-3070C |
| 000 589 32 16 00 Hexagon ratchet, 17 mm | FG 00 | WS00.00-P-0004Z |
| 000 589 33 07 00 Socket | FG 01/Set B | WS01.00-P-0002B |
| 000 589 33 33 00 Counter stay | FG 00/03/05/26/27/28/33/43/46/Set B | WS00.00-N-0051Z |
| 000 589 33 34 00 Tensioning clamp | FG 35/Set C | WS35.00-P-0005C |
| 000 589 34 07 00 Socket | FG 01/Set B | WS01.00-P-0003B |
| 000 589 34 23 00 Inspection gauge | FG 42/Set C | WS42.00-P-0003C |
| 000 589 34 33 00 Counter stay | FG 03/Set C | WS03.00-P-0050C |
| 000 589 34 33 00 Counter stay | FG 26/27/Set C | WS26.00-P-0114C |
| 000 589 34 33 00 Counter stay | FG 28/Set C | WS28.00-P-0002C |
| 000 589 34 34 00 Chuck | FG 35/Set C | WS35.00-P-0006C |
| 000 589 35 23 00 Inspection gauge | FG 42/Set C | WS42.00-P-0004C |
| 000 589 35 33 00 Countersupport | FG 00 FG 23/26/27/28/33/35/42/43/46/Set C | WS00.00-N-3033Z |
| 000 589 35 33 00 Countersupport | FG 08/Set B | WS08.00-P-0011B |
| 000 589 38 19 00 Dial gage | FG 35/Set C | WS35.00-P-0007C |
| 000 589 40 37 00 Clamp | FG 00 FG 01/07/14/83/26 Set B | WS00.00-N-0005Z |
| 000 589 40 37 00 Clamp | FG 00/01/07/18/20/47/82/88 | WS00.00-P-0005Z |
| 000 589 47 31 00 Alignment tool | FG 25/Set B | WS25.00-P-0003B |
| 000 589 49 37 00 Pliers | FG 42/Set C | WS42.00-P-0005C |
| 000 589 49 98 00 Oil sample container | FG 00/Set B | WS00.00-P-0263B |
| 000 589 50 37 00 Pliers | FG 42/Set C | WS42.00-P-0007C |
| 000 589 50 98 00 Disposable antistatic seat cushion cover | FG 91/Set A | WS91.00-P-0047A |
| 000 589 51 37 00 Pliers | FG 03/Set C | WS03.00-P-0005C |
| 000 589 51 43 00 Installation tool | FG 42/Set C | WS42.00-P-0008C |
| 000 589 52 37 00 Pliers | FG 26/Set C | WS26.00-P-0005C |
| 000 589 52 37 00 Pliers | FG 27/Set C | WS27.00-P-0001C |
| 000 589 52 37 00 Pliers | FG 46/Set C | WS46.00-P-0093C |
| 000 589 52 37 00 Pliers | FG 47/Set B | WS47.00-P-0036B |
| 000 589 52 43 00 Resetting device | FG 40/Set A | WS40.00-P-0067A |
| 000 589 52 43 00 Resetting device | FG 42/Set A | WS42.00-P-0009A |
| 000 589 52 43 00 Resetting device | FG 49/Set B | WS49.00-P-0004B |
| 000 589 54 37 00 Clamp | FG 00/01/07/08/13/14/18/20/22/28/33/46/47/54/82/83/Set B | WS00.00-P-0006Z |
| 000 589 54 37 00 Clamp | FG 46/Set A | WS46.00-P-0090A |
| 000 589 55 37 00 Cable pliers | FG 15/Set B | WS15.00-P-0001B |
| 000 589 58 43 00 Installation tool | FG 05/Set C | WS05.00-N-0006C |
| 000 589 60 34 00 Chuck | FG 26/Set C | WS26.00-P-0006C |
| 000 589 62 34 00 Extension | FG 26/Set C | WS26.00-P-0007C |
| 000 589 63 34 00 Extension | FG 35/Set C | WS35.00-P-0008C |
| 000 589 65 33 00 Puller | FG 00/03/27/33 | WS00.00-P-0007Z |
| 000 589 65 33 00 Puller | FG 26/Set C | WS26.00-P-0008C |
| 000 589 67 21 00 torque wrench | FG 00 FG 43 | WS00.00-P-0008Z |
| 000 589 68 03 00 Box wrench bit | FG 01/07/09/14/set A | WS07.00-N-0004A |
| 000 589 68 03 00 Box wrench bit | FG 07/09/Set B | WS07.00-P-0004B |
| 000 589 68 33 00 Internal extractor | FG 00 FG 23/26/27/28/33/35/42/46/Set C | WS00.00-N-3030Z |
| 000 589 68 33 00 Internal puller | FG 28/Set C | WS28.00-P-0003C |
| 000 589 69 03 00 Box wrench bit | FG 46/Set B | WS46.00-P-0002B |
| 000 589 69 03 00 Ring wrench bit | FG 01/05/07/09/Set B | WS07.00-P-0088B |
| 000 589 70 03 00 Box wrench bit | FG 46/Set B | WS46.00-P-0003B |
| 000 589 71 03 00 Box wrench bit | FG 83/14/26/07/47 Set K | WS83.00-P-0001K |
| 000 589 72 03 00 Box wrench bit | FG 83/Set K | WS83.00-P-0002K |
| 000 589 75 03 00 Box wrench bit | FG 00 | WS00.00-P-0009Z |
| 000 589 75 03 00 Box wrench bit | FG 42/Set A | WS42.00-N-3000A |
| 000 589 75 03 00 Box wrench bit | FG 42/Set A | WS42.00-P-3000A |
| 000 589 76 03 00 Box wrench | FG 00 | WS00.00-P-0010Z |
| 000 589 76 03 00 Box wrench | FG 42/Set A | WS42.00-P-0078A |
| 000 589 77 03 00 Box wrench socket | FG 07/Set B | WS07.00-N-0005B |
| 000 589 77 03 00 Box wrench socket | FG 01/07/Set B | WS07.00-P-0005B |
| 000 589 77 03 00 Box wrench socket | FG 42/Set B | WS42.00-P-0073B |
| 000 589 77 63 00 Adapter | FG 20/Set B | WS20.00-P-0002B |
| 000 589 78 03 00 Box wrench bit SW 27 mm | FG 14/Set B | WS14.00-P-0008B |
| 000 589 78 03 00 Box wrench bit SW 27 mm | FG 83/Set B | WS83.00-N-3021B |
| 000 589 80 63 00 Clamping plates | FG 32/Set B | WS32.00-P-0001B |
| 000 589 82 63 00 Mylon cord | FG 40/Set B | WS40.00-P-0002B |
| 000 589 85 63 00 Sequentronic (SEQ) manual transmission gearshift lever | FG 26/Set B | WS26.00-P-3435B |
| 000 589 86 63 00 Adapter | FG 60/67/72/Set K | WS60.00-P-0085K |
| 000 589 87 33 00 Gripper | FG 00/26/Set C | WS00.00-N-3054Z |
| 000 589 87 63 00 Spacers | FG 63/64/Set K | WS63.00-P-1146K |
| 000 589 88 33 00 Puller, two-arm | FG 00 | WS00.00-P-0011Z |
| 000 589 88 63 00 Removal assembly | FG 54/82/Set B | WS54.00-P-0067B |
| 000 589 89 63 00 New manual transmission gearshift lever | FG 26/Set B | WS26.00-P-0108B |
| 000 589 90 63 00 Clip remover | FG 72/82/set K | WS82.00-P-0036K |
| 000 589 94 33 00 Puller | FG 26/Set C | WS26.00-P-0009C |