611 589 00 63 00 Connector - WS01.00-P-0057B

WARNING: This page is about a different car, the 2009 Mercedes-Benz CLK350 and 2008 Mercedes-Benz CLK350. However, it is still accessible from the selected car via links, so may be relevant.

FG 01/05/Set B

ENGINES 611/980, 612/965/966, 613, 628, 629, 639, 642, 646, 647/981, 648, 651, 668

ENGINES 648.960 in MODEL 220

ENGINES 646

Use:

Connector for inserting into an injector bore for measuring pressure loss. In combination with adapter R1/4" to connection nipple for quick-coupling from compression recorder set 001 589 76 21 00 or 001 589 78 21 00 also for measuring compression. Attachment is with the original tensioning claw.

Not for engines 611.981/687, 612.981, 647.981.

For engines 611.981/987, 612.981, 647.981 in model 906: only use for AR05.30-D-3510B and AR05.30-D-3510NA For engines 646 in model 906: only use for AR05.30-D-3510SD For engine OM 651:

Only use in combination with genuine clamping claw OM 642. Drill the fastening bore to a diameter of 7.5 mm.

Fig 1: Identifying Connector (611 589 00 63 00)

Courtesy of MERCEDES-BENZ USA