LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> CLK320 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 242 (Electrical System -- Basic Knowledge -- C300 (204.054)) >> Basic Knowledge >> Fuse assignment of front prefuse box - GF54.15-P-1256-07CEA

Fuse assignment of front prefuse box - GF54.15-P-1256-07CEA

WARNING: This page is about a different car, the 2011 Mercedes-Benz C300, 2010 Mercedes-Benz C300, 2009 Mercedes-Benz C300, and 2008 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.

Shown without code (B03) ECO start/stop function 

Fig 1: Fuse Assignment Of Front Pre-Fuse Box - Without Code B03
G00515861Courtesy of MERCEDES-BENZ USA

Shown with code (B03) ECO start/stop function 

Fig 2: Fuse Assignment Of Front Pre-Fuse Box - With Code B03
G00515862Courtesy of MERCEDES-BENZ USA
Fuse Clamping device Cable ID (cable fused) Fused function Rating in amperes (A)
f150 30   Valid without code (B03) ECO start/stop function:  400
-
  • Pyrofuse 88 (F32f88)
 
  Valid for code (B03) ECO start/stop function:  200
35, 0
  • Alternator (G2)
  • Starter (M1)
 
f151 30 10.0 RD
  • Combustion engine fan motor and air conditioning with integrated control (M4/7)
100
f152 30 16.0 RD
  • Front SAM control unit with fuse and relay module (N10/1)
150
f153 30   Valid without code (B03) ECO start/stop function:   
-
  • Spare
100
  Valid for code (B03) ECO start/stop function and front battery position:   
6.0 RD
  • Front SAM control unit with fuse and relay module (N10/1)
60
f154 30z   Valid without code (B03) ECO start/stop function and front battery position:   
6.0 RD
  • Front SAM control unit with fuse and relay module (N10/1)
60
  Valid for diesel engine and code (B03) ECO start/stop function:   
16.0 RD
  • PTC heater booster (R22/3)
150
f155 30   Valid without code (B03) ECO start/stop function:   
-
  • Spare
50
  Valid for code (B03) ECO start/stop function:   
-
  • Spare
100
f156   16.0 RD Valid for diesel engine without code (B03) ECO start/stop function:   
30
  • PTC heater booster (R22/3)
150
  Valid for code (B03) ECO start/stop function:   
30g
  • Front SAM control unit with fuse and relay module (N10/1)
100
f157 30   Valid for model 204.902/982/984 without code (B03) ECO start/stop function:  100
12.0 RD
  • Electrohydraulic power steering (A91/1)
  Valid for code (B03) ECO start/stop function: 
-
  • Spare
f158     Valid without code (B03) ECO start/stop function:   
30 4.0 RD
  • Blower regulator (A32n1)
50
    Valid for code (B03) ECO start/stop function:   
30g 16.0 RD
  • Rear SAM control unit with fuse and relay module (N10/2)
150
f159 30   Valid for code (965) Electrical preinstallation for rental vehicles without code (B03) ECO start/stop function:   
4.0 RDGN
  • Special-purpose vehicle multifunction control unit (N26/9)
50
  Valid for code (B03) ECO start/stop function:   
25.0 RD
  • Additional battery relay (K57/2)
200
f160 30   Valid without code (B03) ECO start/stop function:   
-
  • Spare
60
  Valid for code (B03) ECO start/stop function:   
4.0 RD
  • Blower regulator (A32n1)
50
f161     Valid without code (B03) ECO start/stop function:   
30g 16.0 RDWH
  • Front SAM control unit with fuse and relay module (N10/1)
100
    Valid for code (965) Electrical preinstallation for rental vehicles and code (B03) ECO start/stop function:   
30 4.0 RDGN
  • Special-purpose vehicle multifunction control unit (N26/9)
50
f162     Valid without code (B03) ECO start/stop function:   
30g -
  • Spare
100
    Valid for code (B03) ECO start/stop function:   
30 -
  • Spare
60
f163 30g 16.0 RD Valid without code (B03) ECO start/stop function: 
  • Rear SAM control unit with fuse and relay module (N10/2)
150
f164 30 10.0 RD Valid without code (B03) ECO start/stop function: 
  • Rear SAM control unit with fuse and relay module (N10/2)
80