LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> CLK320 2D Convertible >> Repair and Diagnosis >> Collision >> General Collision Information >> Side Wall -- Testing & Repair -- 209 Chassis - 1 Of 3 >> Testing & Repair >> Partially replace outer rear wheel well - AR63.10-P-0660QBS (Black Series) >> Install outer rear wheel well section - AR63.10-P-0660-04QBS

Install outer rear wheel well section - AR63.10-P-0660-04QBS

  1. Apply 2-component adhesive to body in crosshatched areas.

    IMPORTANT Observe the manufacturer's specifications for the curing and processing time of the adhesive.

    Fig 1: Identifying Outer Rear Wheel Well Section 2-Component Adhesive Application Area
    G07827837Courtesy of MERCEDES-BENZ USA
    Fig 2: Identifying Inner Rear Wheel Well Section Spot Weld Areas
    G07827838Courtesy of MERCEDES-BENZ USA
  2. Install outer rear wheel well section (1) with rear fender, fit and fix in place with clamping pliers.
  3. Remove rear fender.
  4. Inner rear wheel well section (1) POLARIZATION RESISTANCE SINGLE-ROW SPOT WELD (areas A and B).
  5. Clean welding areas and coat with zinc dust paint.
scientia non olet · About LEMON Manuals