Adjust parking brake - AR42.20-P-0540A
MODEL 129, 170, 202, 203, 208, 210
MODEL 140 as from 1.11.93
MODEL 209.3/ 4
MODIFICATION NOTES
| 23.8.05 | Clearance adjustment value changed to 8 teeth | Step 7 |
| Check | |||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between the columns of the and position the four support plates below the lifting platform support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| 1.1 | Check version of pedal assembly | Except model 170 | |
| Parking brake pedal assembly modified | BT42.20-P-0510-01A | ||
| 2.1 | Operate parking brake pedal and check pedal travel of parking brake pedal | Except model 170 | |
Adjusting parking brake. |
|||
| Actuating force on parking brake pedal | *BE42.20-P-1001-01C | ||
| Notches through which the parking brake pedal must be depressed | *BE42.20-P-1002-01C | ||
| 2.2 | Operate parking brake lever and check travel of the parking brake lever | Model 170 | |
| Remove | |||
| 3 | Raise vehicle at rear | ||
| 4.1 | Slacken adjusting screw (89) | Models 129, 170 | |
| 5 | Undo a wheel bolt at the left and right rear wheel | ||
| Remove/install wheels, rotate if necessary | AP40.10-P-4050Z | ||
| Adjust | |||
| 6 | Use screwdriver to rotate adjusting wheel (105) until the brake shoes abut the parking brake drum and the rear wheel or brake disk can no longer be turned by hand. | Right side: Turn the adjusting wheel (105) from the bottom upwards. Left side: Turn the adjusting wheel (105) from the top downwards. |
|
| Adjusting mechanism for parking brake modified | Type 140 | BT42.20-P-9311-01A | |
| 7 | Turn back adjusting wheel (105) until the wheel or brake disk is able to rotate completely freely by hand | ||
| 8.1 | Turn in adjusting screw (89) until the brake cables no longer sag | Model 129, 170 | |
| Check | |||
| 9.1 | Operate parking brake pedal several times and check pedal travel of the parking brake pedal, then release the parking brake | Except model 170 | |
| Actuating force on parking brake pedal | *BE42.20-P-1001-01C | ||
| Notches through which the parking brake pedal must be depressed | *BE42.20-P-1002-01C | ||
| 9.2 | Operate parking brake lever several times, check parking brake lever travel, and then release the parking brake | Model 170 | |
| 10 | Check for unobstructed movement of rear wheels or brake disks | ||
| Install | |||
| 11 | Fit wheel bolts or light alloy wheels | ||
| Remove/install wheels, rotate if necessary. | AP40.10-P-4050Z |
ADJUSTMENT VALUES FOR PARKING brake
| Number | Designation | Model 129, Pedal assembly with pulled notch | Model 129, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 140, Pedal assembly with pulled notch | Model 140, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 202, Pedal assembly with pulled notch | Model 202, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 203, Pedal assembly with pulled notch | Model 203, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 208, Pedal assembly with pulled notch | Model 208, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 209, Pedal assembly with pulled notch | Model 209, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||
ADJUSTMENT VALUES FOR PARKING BRAKE
| Number | Designation | Model 210, Pedal assembly with pulled notch | Model 210, Pedal assembly with pushed notch | |
|---|---|---|---|---|
| BE42.20-P-1001-01C | Actuating force on parking brake pedal | N | 170 (-50/+70) | 170 (-50/+70) |
| BE42.20-P-1002-01C | Notches through which the parking brake pedal must be depressed | Quantity | 1 | 5 |
| See fig. | BT42.20-P-0510-01A | BT42.20-P-0510-01A | ||