Side Wall -- Testing & Repair -- 209 Chassis - 3 Of 3

• Testing & Repair
  • Replace complete A-pillar together with side longitudinal member - AR63.20-P-1150
    • Replace complete A-pillar together with side longitudinal member - AR63.20-P-1150Q
      • Notes
      • Separate A-pillar with side longitudinal member - AR63.20-P-1150-01Q
      • Prepare A-pillar with side longitudinal member for installation - AR63.20-P-1150-06Q
    • Replace complete A-pillar together with side longitudinal member - AR63.20-P-1150QA
      • Notes
      • Separate A-pillar together with side longitudinal member - AR63.20-P-1150-01QA
      • Prepare A-pillar with side longitudinal member for installation - AR63.20-P-1150-06QA
  • Replace complete B-pillar - AR63.20-P-1350
    • Replace complete B-pillar - AR63.20-P-1350Q
      • Notes
      • Separating inner B-pillar - AR63.20-P-1350-01Q
      • Prepare inner B-pillar for installation - AR63.20-P-1350-02Q
      • Install inner B-pillar - AR63.20-P-1350-03Q
    • Replace complete B-pillar - AR63.20-P-1350QA
      • Notes
      • Separating inner B-pillar - AR63.20-P-1350-01QA
      • Prepare inner B-pillar for installation - AR63.20-P-1350-02QA
      • Install inner B-pillar - AR63.20-P-1350-03QA
  • Replace outer B-pillar with side longitudinal member - AR63.20-P-1370Q
    • Notes
    • Cut outer B-pillar with side longitudinal member - AR63.20-P-1370-01Q
    • Cut outer B-pillar with side longitudinal member - AR63.20-P-1370-01QA
    • Prepare outer B-pillar with side longitudinal member - AR63.20-P-1370-04Q
    • Prepare outer B-pillar with side longitudinal member - AR63.20-P-1370-04QA
    • Install outer B-pillar with side longitudinal member - AR63.20-P-1370-05Q
    • Install outer B-pillar with side longitudinal member - AR63.20-P-1370-05QA
  • Replace welding panel on side longitudinal member - AR63.30-P-1500Q
    • Notes
    • Remove welding-on plate on side longitudinal member - AR63.30-P-1500-01Q
    • Install welding panel on side longitudinal member. - AR63.30-P-1500-03Q
  • Partially replace main floor - AR63.40-P-1180P
    • Notes
    • Separate main floor, inner longitudinal member and middle cross member - AR63.40-P-1180-06P
    • Preparing main floor, inner longitudinal member and middle cross member - AR63.40-P-1180-07P
    • Installing main floor, inner longitudinal member and middle cross member - AR63.40-P-1180-08P
    • Weld main floor, bottom - AR63.40-P-1180-12P
  • Remove/install tunnel reinforcement - AR63.40-P-1185
    • Remove reinforcement from tunnel - AR63.40-P-1185-01QA
    • Prepare tunnel reinforcement for installation - AR63.40-P-1185-02QA
    • Install reinforcement on tunnel - AR63.40-P-1185-03QA
  • Completely replace rear fender - AR63.50-P-1400
    • Completely replace rear fender - AR63.50-P-1400Q
      • Notes
      • Remove/install cover for filler fitting - AR63.50-P-1400-01P
      • Separate rear fender - AR63.50-P-1400-02Q
      • Preparing new rear fender - AR63.50-P-1400-03Q
      • Install rear fender - AR63.50-P-1400-04Q
    • Replace complete rear fender - AR63.50-P-1400QA
      • Notes
      • Shape body flange for taillamp with embossing tool - AR63.50-P-1400-09CW
      • Remove/install cover for filler neck - AR63.50-P-1400-01QA
      • Separate rear fender - AR63.50-P-1400-02QA
      • Prepare new rear fender - AR63.50-P-1400-03QA
      • Install rear fender - AR63.50-P-1400-04QA