LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2004 >> CL600 >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle-- Testing & Repair -- 215 & 220 Chassis - 2 Of 2 >> Testing & Repair >> Replace radial sealing ring at drive pinion gear (with rear axle differential installed) - AR35.31-P-0530I >> Measuring and noting total friction torque of drive pinion - AR35.31-P-0530-04I

Measuring and noting total friction torque of drive pinion - AR35.31-P-0530-04I

Fig 1: Identifying Connecting Piece (100 589 02 59 00)
G04845511
Fig 2: Identifying Torque Measuring Instrument (001 589 49 21 00)
G04845512
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1013-06A Wrench bit 41 mm hexagon 3 /4 inch four-point
  1. Measure and note the total friction torque with COMMERCIALLY AVAILABLE TOOLS socket (040a), SPECIAL TOOL connecting piece (040c) and SPECIAL TOOL torque meter (040b) at the twelve-point nut with collar or hexagon nut with collar.

Shown on 198 mm dia. rear axle center assembly 

Fig 3: Identifying Rear Axle Center Assembly - Shown On 198 Mm Dia
G04845513
scientia non olet · About LEMON Manuals