Removing and installing rear door control module - AR72.29-P-1100M

MODEL 220 

Fig 1: Identifying Rear Door Control Module Remove/Install Components

	Removal, installation
1	Press trim strip (1) out of door control module finisher (2) using assembly wedge (5)		Figure
2	Remove door handle cover (3) from door handle
3	Unscrew door control module finisher (2) from door lining (4) and press out using assembly wedge (5)		AR72.12-P-1010M
			Figure
4	Disconnect the connectors from left/right rear door control module (N69/3, N69/4) and remove door control module cover (2)
5	Unclip left/right rear door control module (N69/3, N69/4) from door control module cover (2)	For this purpose, press mounting clips arrow on left/right rear door control module (N69/3, N69/4) together with suitable tool and simultaneously press left/right rear door control module (N69/3, N69/4) out of door control module cover (2)
6	Install in reverse order

Fig 2: Identifying Assembly Wedge (110 589 03 59 00)