Remove/install supporting joint at wheel carrier (wheel carrier installed) - AR35.20-P-0116I: Notes
MODELS 215.373 /374 /375 /376 /378 /379, 220.025 /026 /028 /063 /065 /067 /073 /074 /070 /075 /083 /084 /087 /125 /126 /128 /165 /167 /173 /174 /170 /175 /176 /178 /179 /183 /184 /187
Shown on model 220 with Airmatic
Fig 1: Identifying Supporting Joint At Wheel Carrier Remove/Install Components - Shown On Model 220 With Airmatic
| Remove/Install | |||
| While working on the rear axle care must be taken to ensure that the surface of all aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the parts will be affected | |||
| 1 | Remove rear wheels | ||
| Remove/install wheels, rotate if necessary | AP40.10-P-4050Z | ||
| 2.1 | Remove spring link (6) | Vehicles with Airmatic (semi-active air suspension), code 489a. | AR35.20-P-0114I |
| with Active Body Control (ABC) code 487a. | AR35.20-P-0114N | ||
| 3 | Remove supporting joint (7a) from wheel carrier (7) | AR35.20-P-0116-01I | |
| Figure | |||
| 4 | Install in the reverse order |