Remove/install front rubber bushing in rear axle mount - AR35.10-P-0041M

MODELS 215.374 /376 /379, 220.074 /174 /176 /179 

	Remove/Install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the hydraulic hoist and position the four support plates below the hoist support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	While working on the rear axle care must be taken to ensure that the surface of all aluminum components do not get any scratches, cracks and notches. Otherwise the service life of the parts will be affected
	Notes on self-locking nuts and bolts	All models	AH00.00-N-0001-01A
1	Remove rear axle.	Only models 215.376 /379, 220.176/ 179.	AR35.10-P-0010N
		Only models 220.074/ 174.	AR35.10-P-0010AM
		Do not remove rear axle from assembly top and secure axle carrier with tensioning strap to prevent it from falling down.
2	Remove front rubber mounts of rear axle mount	Installation:  install new rubber mount.	AR35.10-P-0040-03I
		Extractor tool	Figure
		Insertion tool	Figure
		Lubricant	*BR00.45-Z-1002-06A
3	Install in the reverse order

Fig 1: Identifying Extraction Tool (220 589 02 43 00)

Fig 2: Identifying Insertion Tool (140 589 04 33 00)

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1002-06A	Lubricant	A 000 989 01 60