Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920I

MODEL 215, 220 up to 30.6.00 with CODE (317) GSM cellular telephone (D2B) 

MODEL 215, 220 as of 1.7.00 with CODE (854) MB cellular telephone 

Shown on model 220 

Fig 1: Identifying Vehicle Interface (Cellular Telephone) Remove/Install Components - Shown On Model 220

	Removal, installation
1	Connect quiescent current retention unit		AR54.10-P-1030-07I
			*WH58.30-Z-1012-09A
2	Disconnect ground cable of battery		AR54.10-P-0003I
3.1	Remove rear seat cushion	Model 215.	AR91.12-P-1020N
		Model 220.	AR91.12-P-1020MA
3.2	Remove bucket seats	Model 220 with code 401, right side only.	AR91.12-P-1020M
4	Remove seat adjustment mechanism on rear seat	Model 220 with code 401, right side only.	AR91.12-P-1520M
5	Unscrew screws (1) and nuts (2) and remove mounting plate (3) from vehicle floor
6	Unscrew screws (4)
7	Release connectors (5) on D2B interface for cellular telephone (A59/1) and disconnect	Do not bend D2B wires.
		If the D2B interface for cellular telephone (A59/1) remains removed for a longer period of time, it is necessary to install an adapter to close the DB2 ring.
8	Install in the reverse order