Remove/install CD player with changer - AR82.64-P-7507MN

MODELS 220.0 /1, 215.3 as of 1.9.02 with CODE (819) 6-disc CD changer 

Common bracket for CD changer and navigation processor 

Shown on model 220 as of model year 2004 (code 804) with MOST fiber optical cable and sound system (code 810) 

Fig 1: Identifying CD Player With Changer Remove/Install Components (Shown On Model 220)

Only for COMAND APS (with navigation) code (527a) 

Fig 2: Identifying CD Player With Changer Remove/Install Components (COMAND APS (With Navigation) Code (527a))

Fig 3: Identifying Bracket, CD Player With Changer And Bolts

	Remove/install
	Risk of explosion  caused by explosive gas. Risk of poisoning and caustic burns  caused by swallowing battery electrolyte. Risk of injury  caused by burns to skin and eyes from battery acid or when handling damaged lead-acid batteries	No fire, sparks, open flames or smoking. Wear protective gloves, acid-resistant clothing and safety glasses. Pour battery electrolyte only into suitable and appropriately marked containers.	AS54.10-Z-0001-01A
1	Disconnect battery ground line		AR54.10-P-0003I
	Notes on battery	All models	AH54.10-P-0001-01A
	Notes on AGM battery	Model 215 as of 1.1.01. Model 220.028 with code (450) Taxi version. Models 220.070/075/175/178/875/878 as of 1.1.01.	AH54.10-P-0002-01A
2	Remove coverings in trunk	Left side paneling.	AR68.30-P-4600M
3	Unscrew screws (2).
4	Unscrew nut (3) and bolt (4) from bracket (1).
5	Remove CD player with changer (in luggage compartment) (A2/6) with bracket (1) from the left wheelhouse recess	Do not kink or stretch fiber optic cables! Do not damage standard wiring harness (23).
6	Unlock fiber optical cable coupling (11) at CD player with changer (in luggage compartment) (A2/6) and detach	Do not buckle or extend fiber optical cable, routing radii must be greater than 25 mm!  If the CD player with changer (in luggage compartment) (A2/6) is to remain removed over a longer period of time, install an adapter to close the fiber optical cable ring.
7	Detach black, 3-pin coupling (24) (voltage supply) from CD player with changer (in luggage compartment) (A2/6)
8.1	Detach black, 8-pin coupling (33) (voltage supply of navigation processor), blue coupling (34) (GPS antenna line) and fiber optical cable coupling (31) from navigation processor (N41/1)	Only for COMAND APS (with navigation) code (527a)
9	Unscrew the 4 bolt M4x6 (21) to the right and left at bracket (1) and remove CD player with changer (in luggage compartment) (A2/6) from bracket (1)
10	Install in the reverse order	Bracket (1) is locked in bracket (6) with the locking tabs (25).
	Check
11	Perform function check	See owner's manual.