Removing and installing cover below instrument panel (left) - AR68.10-P-1500M

MODEL 220 

Fig 1: Identifying Instrument Panel Remove/Install Components - Model 220

	Removal, installation
1	Unscrew mounting nut for front cover (1)
2	Slide front cover (1) with insert lugs (2) toward front out of knee guard (3) and remove downward out of guide (arrow) over accelerator pedal	Installation:  Insert cover (1) in guide (arrow) on accelerator pedal
3	Unclip footwell lamp from knee guard (3) and disconnect connectors
4	Unscrew screws (4), (4 each)
5	Push knee guard (3) with hooks (5), (4 each) toward rear out of instrument panel and simultaneously out of center console	Installation  : Ensure that the side guide lug for the knee guard is inserted properly in the area of the center console (arrow)
6	Install in opposite order