Removing and installing electric roller blind for rear window - AR68.50-P-4600M

MODEL 215, 220 with CODE (540a) Electric roller blind for rear window 

Fig 1: Identifying Electric Roller Blind For Rear Window - Model 215,220

	Remove/install
1	Remove parcel shelf (1)	Disconnect electric roller blind connector (arrow).	AR68.30-P-4580M
2	Unscrew nuts (5)
3	Unclip electric roller blind (2) from rear shelf (1)	Pry clips (4) on retaining brackets (3) off with corresponding tool. If it is necessary to replace roller blind motor:↓
		Remove roller blind motor	AR68.50-P-4800M
4	Install in the reverse order