Removing and installing cellular telephone interface - AR82.70-P-7379I

MODEL 215, 220 up to 30.6.00 with CODE (316) MB GSM cellular telephone (D2B) 

Shown on model 220 

Fig 1: Identifying Cellular Telephone Interface Remove/Install Components (Shown On Model 220)

	Removing, installing
1	Connect quiescent current retention unit		AR54.10-P-1030-07I
			*WH58.30-Z-1012-09A
2	Disconnect ground cable of battery		AR54.10-P-0003I
3.1	Remove rear seat cushion	Model 215.	AR91.12-P-1020N
		Model 220.	AR91.12-P-1020MA
3.2	Remove bucket seats	Model 220 with code 401, right side only.	AR91.12-P-1020M
4	Remove seat adjustment mechanism on rear seat	Model 220 with code 401, right side only.	AR91.12-P-1520M
5	Fold back cover mats
6	Unscrew bolt (1) and nuts (2)
7	Remove mounting plate (3) from vehicle floor and turn over
8	Release clips (4) and remove D2B interface for permanently installed telephone (A59) from mounting plate
9	Release connectors (5a, 5b) and disconnect
10	Release D2B connector (5c) and disconnect	Do not kink D2B connector. If the D2B interface for permanently installed telephone (A59) remains removed for a longer period of time, it is necessary to install an adapter to close the DB2 ring.
11	Install in the reverse order