Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A

REAR AXLE SHAFT

Number	Designation			Model 129	Model 140	Model 170
BA35.30-P-1001-01A	Collar nut, rear axle shaft to rear axle shaft flange	1st stage	Nm	220	320	220
		Stage 2	∠°	-	-	-

REAR AXLE SHAFT

Number	Designation			Model 202	Model 203	Model 208
BA35.30-P-1001-01A	Collar nut, rear axle shaft to rear axle shaft flange	1st stage	Nm	220	220	220
		Stage 2	∠°	-	-	-

REAR AXLE SHAFT

Number	Designation			Model 209	Model 210.0	Model 210.2/6
BA35.30-P-1001-01A	Collar nut, rear axle shaft to rear axle shaft flange	1st stage	Nm	220	220	320
		Stage 2	∠°	-	-	-

REAR AXLE SHAFT

Number	Designation			Model 211	Model 215
BA35.30-P-1001-01A	Collar nut, rear axle shaft to rear axle shaft flange	1st stage	Nm	320	320
		Stage 2	∠°	-	-

REAR AXLE SHAFT

Number	Designation			Model 220	Model 230 except 230.479	Model 230.479
BA35.30-P-1001-01A	Collar nut, rear axle shaft to rear axle shaft flange	1st stage	Nm	320	320	150
		Stage 2	∠°	-	-	45

Detaching 

1. Apply parking brake
2. Unscrew the twelve-point collar nut (12) that attaches the rear axle shaft.

   Mount on and secure 

   Replace twelve-point nut.

3. Tighten twelve-point collar nut (12) .
4. Use caulker to secure twelve-point collar nut (12) with no residual gap between the groove and the securing tabs (arrow).
5. Release parking brake.
   Fig 1: Locating Twelve-Point Collar Nut