Remove/install cover below instrument panel (left) - AR68.10-P-1500G

MODEL 170 

Fig 1: Identifying Left Cover Below Instrument Panel Remove/Install Components - Model 170

	Remove/install
1	Remove side air nozzle (driver's side)		AR68.10-P-1100G
2	Unscrew screw (1)
3	Remove cover (2) in area of steering column
4	Unscrew screw (3, 4 and 5) from light module (N7-1)
5	Unscrew screws (arrows, 6 each) from cover (6).	Do not remove accelerator pedal cover (10) from cover (6).
6	Pull cover (6) off of cover (7)
7	Remove light module (N7-1) from cover (6).	Do not disconnect electrical connectors from light module (N7-1).
8	Unscrew screw (9) from handle (8).
9	Guide handle (8) through cover (6).
10	Disconnect connector from data link connector (X11/4)
11	Remove cover (6) with pedal cover (10) downward and rearward.	When installing, insert front lugs of pedal cover (10) below floor covering.
12	Install in the reverse order