Prepare wiring harness from package contents - AR54.18-P-0900-01G

Select wiring harness by means of the following representations.
All possible wiring harness combinations for the repair can always be found in the repair kit. However, the wiring harnesses fitted to the vehicle may vary specific to equipment and country.

Main wiring harness (is always required)

Fig 1: Identifying 4 And 18 Plug Main Wiring Harness

ECE wiring harness, anti-theft alarm system (ATA)

Fig 2: Identifying 4,6 And 18 ECE Wiring Harness And Anti-Theft Alarm System (ATA)

USA/Canada wiring harness, anti-theft alarm system (ATA)

Fig 3: Identifying 4,6 And 18 Pin Plug USA/Canada Wiring Harness, Anti-Theft Alarm System (ATA)
With the anti-theft alarm system (ATA) without interior motion sensor, insulate individual lines from the wiring harness with heat-shrinkable tube and tie back the 6-pin plug, black (assigned 3-fold) (2) on the wiring harness with tie strap and fix in position.
Dispose of wiring harness which is not required.