Cleaning brake discs with cleaning pads - AR42.10-P-0260A

MODEL 129, 140, 170, 202, 208, 210

Fig 1: Identifying Cleaning Pads

	Removing, installing
1	Remove front and rear brake pads on each axle separately	Only fit one axle with cleaning pads at a time
		Front brake pads Models 202.018 /020 /022 /023 /078 /080/ 083 /120 /121 /122 /125 /133 /180 /182/ 193, 202.028 up to 31.8.95 except CODE (957a) AMG engineering package	AR42.10-P-1600AM
		Front brake pads Models 170.435 /445 /447, 202.024 /025 /026 /029 /082 /085 /086 /089 /128 /188, 208.335 /345 /347 /365 /435 /445 /447 /465 Model 202.028 as of 1.9.95, 210.00 /01 /02 /035 /037 /04 /05 /06 /08 /20 /21 /22 /23 /24 /26 /28 /60 /61 /663 except CODE (957a AMG engineering package MODEL 210.070 with CODE (491) with CODE (498) with CODE (625) Model 208.370 /470 with CODE (491)	AR42.10-P-1600BM
		Front brake pads Model 202.033 /093 Model 210.072 with CODE (957a) AMG-Technik-Paket E 50 AMG Model 210.074 /274 Model 208.374	AR42.10-P-1600CM
		Front brake pads Models 129, 140, 210.072/270/272 Model 210.072 except CODE 957a AMG engineering package Model 208.370 /470 except CODE (491) Model 210.070 except CODE (498) except CODE (625) except CODE (491)	AR42.10-P-1600DM
		Front brake pads Model 202.028, 210.055 with CODE (957a) AMG engineering package	AR42.10-P-1600EM
		Rear brake pads Models 129, 140, 170, 202, 208, 210	AR42.10-P-1700AM
2	Install cleaning pads (050) on each axle separately, either front or rear	Cleaning pads only available with two securing bolts.
			Fig 2
		Models 129, 210.072/270/272 Model 210.072 except CODE 957a AMG engineering package Model 208.370 /470 except CODE (491) Model 210.070 except CODE (498) except CODE (625) except CODE (491) front
		Models 202.018 /020 /022 /023 /078 /080 /083 /120 /121 /122 /125 /133 /180 /182 /193, 202.028 up to 31.9.95 except CODE (957a) AMG engineering package front	Fig 3
		Models 170.435 /445 /447, 202.024 /025 /026 /029 /082 /085 /086 /089 /128 /188, 208.335 /345 /347 /365 /435 /445 /447 /465 Model 202.028 as of 1.9.95, 210.00 /01 /02 /035 /037 /04 /05 /06 /08 /20 /21 /22 /23 /24 /26 /28 /60 /61 /663 except CODE (957a) AMG engineering package Model 210.070 with CODE (491) with CODE (498) with CODE (625) Model 208.370 /470 with CODE (491) front	Fig 8
		Models 129, 170, 202, 208, 210 only with two holding pins at the fixed caliper at rear .	Fig 6
		Model 140 with 2-piston fixed caliper at front .	Fig 4
		Model 140 with 4-piston fixed caliper at front.	Fig 5
		Model 140 at rear .	Fig 7
3	Drive vehicle at a speed of approx. 30 km/h for a distance of 300 meters depressing brake pedal slightly several times.	Do not use a roller or chassis dynamometer to clean brake discs. The braking effect is greatly reduced by the cleaning pads.
4	Install in reverse sequence