Oil exit via breather on rear axle center assembly - AF35.31-P-4140CU
MODEL 170.### #A up to 189000 Rear axle center assembly, dia. 198
MODEL 202.### #A up to 870000 Rear axle center assembly, dia. 198
MODEL 202.### #F up to 980600 Rear axle center assembly, dia. 198
MODEL 208.### #F up to 162000 Rear axle center assembly, dia. 198
MODEL 208.### #T up to 054500 Rear axle center assembly, dia. 198
MODEL 210.### #A up to 999999 Rear axle center assembly, dia. 198
MODEL 210.### #B up to 173000 Rear axle center assembly, dia. 198
MODEL 220.### #A up to 135000 Rear axle center assembly, dia. 198
| Damage code | Cause | Remedy | ||
|---|---|---|---|---|
| 35 107 04 | Vent shielding insufficient under certain operating conditions and temperatures. | 1 | Remove rear axle center assembly. | AR35.31-P-0520D |
| 2 | Install rear axle cover with modified shield. | |||
| 3 | Remove/install/replace breather | |||
| 4 | Install rear axle center assembly. | AR35.31-P-0520D | ||
PARTS ORDERING NOTES
| Part no. | Designation | Quantity |
|---|---|---|
| 220 350 01 36 | Rear axle cover (model 170/ 202/ 208/ 210) | 1 |
| 220 350 00 36 | Rear axle cover (model 220) | 1 |
| 126 350 00 90 | Breather | 1 |