Removing and installing paneling at top of windshield - AR68.30-P-4250G

MODEL 170 

Fig 1: Identifying Paneling At Top Of Windshield Remove/Install Components

	Removal, installation
1	Remove dome lamp		AR82.20-P-0110G
2	Remove infrared remote control receiver in roof frame		AR80.30-P-4510G
3	Remove both sun visors (1) by unscrewing screws (2) and removing sun visor (1)
4	Remove paneling (3) downward	When installing insert clips (arrows) into windshield frame (arrow) and below A-pillar paneling (4, arrow) Lift rubber lip over paneling (3) with long wedge
			Figure
5	Reinstall in opposite order

Fig 2: Identifying Long Wedge (115 589 03 59 00)