Acoustic alarm, function - GF80.50-P-4005D

MODEL 129, 170 as of 1.6.98 with CODE (551a) Anti-theft alarm (ATA) 

The acoustic alarm is triggered automatically by the alarm signal siren with additional battery (H3/1)  . The sequence of the acoustic  signals can differ depending on how the alarm was triggered and which country is coded in the alarm signal siren with additional battery (H3/1).

• ECE:

  30  seconds short acoustic signals

• :

  60  seconds short acoustic signals

  30  seconds pause

  60  seconds short acoustic signals

The siren coding can be programmed with the version coding for the ATA.

• The alarm can be terminated by activating  or deactivating the ATA. 
• The alarm cannot  be interrupted by disconnecting the connection leads to the alarm signal siren with additional battery (H3/1)!
• The alarm sequence can deviate from the coding when the connection between the alarm signal siren and PSE control module is interrupted.

	Alarm signal siren, location/purpose/design/function		GF80.50-P-4110A
	Optical alarm, function		GF80.50-P-4006D