Removing and installing front shock absorber - AR32.25-P-0105A
MODEL 140, 170, 202, 208, 210
  |
Removing, installing |
|
|
 |
The vehicle must be standing on its wheels when removing the upper shock absorber mounting. |
|
|
| 1 |
Detach upper shock absorber mounting. |
Model 140
Counter piston rod with Allen wrench (WAF 5).
 Models 170, 202, 208, 210:
Remove cap (11e) |
|
| |
|
 Models 170, 202, 208, 210
Installation:
Replace self-locking nut (11a). |
Fig 2 |
| |
|
 Model 140
Nut (11a) |
*BA32.25-P-1001-01A |
| |
|
Models 170, 202, 208, 210
Nut (11p) |
*BA32.25-P-1001-01B |
| |
|
Models 170, 202, 208, 210
Nut (11a) |
*BA32.25-P-1002-01B |
| 2.1 |
Remove plate (11b) and rubber mount (11c). |
Models 170, 202, 208, 210 |
|
| 3 |
Raise vehicle. |
|
|
| 4 |
Detach shock absorber (11) from wishbone (31) and remove downwards. |
Installation:
Replace self-locking nut (11u). |
|
| |
|
Model 140 |
*BA32.25-P-1002-01A |
| |
|
Models 170, 202, 208, 210 |
*BA32.25-P-1003-01B |
| 5 |
Remove mounting parts (11y, 11d, 11f, 11h) for shock absorber (11). |
Models 170, 202, 208, 210
Check mounting parts (11d, 11f, 11h) for damage and cracks. |
|
| 6 |
Check shock absorber. |
|
AR32.25-P-0121A |
| 7 |
Install in the reverse order. |
|
|
Front axle shock absorber
| Number |
Designation |
Model 140 |
| BA32.25-P-1001-01A |
Self-locking nut for attaching shock absorber to front end |
Nm |
40 |
| BA32.25-P-1002-01A |
Self-locking nut for attaching shock absorber to wishbone |
Nm |
100 |
Front axle shock absorber
| Number |
Designation |
Model 170 |
Model 208 |
Model 202 |
| BA32.25-P-1001-01B |
Nut, shock absorber to front end |
Nm |
18 |
18 |
18 |
| BA32.25-P-1002-01B |
Lock nut, shock absorber to front end |
Nm |
30 |
30 |
30 |
| BA32.25-P-1003-01B |
Self-locking nut, shock absorber to wishbone |
|
Nm |
55 |
55 |
55 |
| yellow |
Nm |
- |
- |
- |
| yellow/blue |
Nm |
- |
- |
- |
Front axle shock absorber
| Number |
Designation |
Model 210 except 210.07 with codes Z04, Z06 210.08/28 |
| BA32.25-P-1001-01B |
Nut, shock absorber to front end |
Nm |
18 |
| BA32.25-P-1002-01B |
Lock nut, shock absorber to front end |
Nm |
30 |
| BA32.25-P-1003-01B |
Self-locking nut, shock absorber to wishbone |
|
Nm |
55 |
| yellow |
Nm |
- |
| silver/blue |
Nm |
- |