LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Replace radial sealing ring on connecting flange of rear axle shaft - AR35.31-P-0540 >> Replace radial sealing ring on connecting flange of rear axle shaft - AR35.31-P-0540B >> Pressing off, pressing in radial seal at side of rear axle housing - AR35.31-P-0540-05F

Pressing off, pressing in radial seal at side of rear axle housing - AR35.31-P-0540-05F

G04594351
 Universal hypoid gear oils (SAE 85 W-90) BB00.40-P-0235-07A
G04594348
 Radial seal on side of rear axle housing and connecting flange modified As of 1.4.98 on models 202.085 with transmission 722 and rear axle differential diameter 185, 202.134/194 except CODE (450) Taxi version, 210.007 with rear axle differential diameter 185 BT35.31-P-0013-01A
Fig 1: Identifying Drift (126 589 00 15 00)
G04636356
Fig 2: Identifying Drift (211 589 00 15 00)
G04636357

    Pushing off 

  1. Press radial sealing ring (32) out of housing using a suitable screwdriver.
    Fig 3: Pressing Radial Sealing Ring Out Of Housing
    G04636358

    2. Pressing in 

  2. Coat sealing lip of new radial seal (32) with universal hypoid gear oil.
  3. Press in radial seal (32) using a drift (049b).

    IMPORTANT Rear axle differential dia. 185 mm: SPECIAL TOOL 126 589 00 15 00

    Rear axle differential dia. 187 mm: SPECIAL TOOL 211 589 00 15 00

    Fig 4: Identifying Radial Seal And Drift
    G04636359
scientia non olet · About LEMON Manuals