LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> SLK230 Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Axle -- Testing & Repair -- 170 Chassis - 2 Of 2 >> Testing & Repair >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14A

Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14A

Fig 1: Identifying Installer (140 589 01 43 00)
G04636488
  1. Draw in the front tapered roller bearing outer race (43e) and rear tapered roller bearing outer race (46b) up to the stop in the rear axle housing using the installer.

    NOTES Ensure that the shim (45)is inserted in order to guarantee satisfactory operation.

    NOTES When drawing in do not cant over the tapered roller bearing outer races in order to avoid damage.

    Fig 2: Identifying Shim, Rear Tapered Roller Bearing Outer Race And Axial Needle Roller Bearing
    G04636489
scientia non olet · About LEMON Manuals