Remove/install poly V-belt tensioning device - AR13.25-P-3200RX (SL550)
ENGINE 273 in MODEL 230
| Remove/install | |||
|---|---|---|---|
| Risk of injury caused by moving parts that can pinch, crush or , in extreme cases even sever extremities. | Keep body parts and limbs well clear of moving parts. | AS00.00-Z-0009-01A | |
| 1 | Remove poly-V-belt | AR13.22-P-1202RX | |
| 2 | Lock poly-V-belt tensioning device (2) | Swivel poly-V-belt tensioning device (2) at hexagon (2a) in an anti-clockwise direction (arrow) and lock in place using drift (4). | |
| 3 | Remove bolts (3) and poly-V-belt tensioning device (2) | *BA13.25-P-1001-01P | |
| 4 | Unclamp poly-V-belt tensioning device (2) | When replacing the poly V-belt tensioning device (2) Clamp poly-V-belt tensioning device (2) in a vise, swivel at hexagon (2a) in an counter-clockwise direction (arrow), pull out drift (4) and slacken poly-V-belt tensioning device (2). Installation: The poly-V-belt tensioning device (2) can only be installed when locked. |
|
| 5 | Install in the reverse order |
BELT TENSIONING DEVICE
| Number | Designation | Engine 273 | |
|---|---|---|---|
| BA13.25-P-1001-01P | Bolt connecting poly V-belt tensioning device to timing case cover | Nm | 35 |