LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> SL500 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Fuel & Ignition -- Self-Diagnostic System -- 230 Chassis >> Self-Diagnostic System >> Gasoline injection and ignition system (ME-SFI) diagnosis - diagnostic trouble code memory - AD07.61-P-4000 >> ME-SFI fuel injection and ignition system (ME), DTC memory - AD07.61-P-4000M >> CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MD

CAN fault detection ME-SFI - fault code description - AD07.61-P-4000-32MD

Transmission 722.6 

1 Fault code
(Fault code according to OBD)		 P2037 CAN message from the ETC [EGS] control unit (N15/3) missing or faulty (P0600)
2 Fault storage After expiry of test duration and fault
  Actuation of the indicator lamp  
 
  • Engine diagnosis (EURO4)
  • No actuation
 
  • CHECK ENGINE (MIL) USA ONLY
  • Following two successive drive cycles with faults
3 Checking frequency Continuous
4 Checked signal or status The information motor speed, accelerator pedal position, engine torque, shifting point displacement (e.g. due to TWC heating), engaged gear, variant coding or faults on the transmission which can effect exhaust quality are exchanged between the engine control unit and ETC [EGS] control unit. This communication is monitored.
  Checking duration Approx. 10 seconds
scientia non olet · About LEMON Manuals